GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » Alice » Alice TRD chamber construction » Glue Aw 106 and Aw116 with Hardener HV 953 U
Glue Aw 106 and Aw116 with Hardener HV 953 U [message #1701] Mon, 06 June 2005 10:52
Joerg Hehner is currently offline  Joerg Hehner
Messages: 3
Registered: April 2004
Location: GSI
occasional visitor
Dear Chamberbuilders,

we encountered a problem related to the HV 953 U hardener:
After curing of the glue (AW 106/116 mixed with the hardener)
the surface of the cured glue feels sticky and humid. First
we thought that this might be related to the humidity, since
the stiffness/solidity was OK. Testing of the chambers also
did not show increased currents. However, we did contact the
supply company and they admitted problems with the hardener
since the end of last year (they changed their supply source).
The specified characteristics of the glue (hardener) might thus
not be guaranteed any more. Consequently we need to know:

1) Do you also observe the same features (stickiness of the
surface of the glue after curing)?

2) What are the "Ident-Numbers" and "Batch-Numbers" of the
hardener and glue cans that you received. They are indicated
on the labels of the cans. They are for example (one of our
cans): Ident Number 041221400 and Batch Number AD41005300.
Please send these numbers to me (Joerg) as fast as possible.

Best regards,
Joerg and Christian
Read Message
Previous Topic: Data to be stored for DCDB
Next Topic: REM Pictures from TRD Wires
Goto Forum:

Current Time: Wed Apr 17 06:52:49 CEST 2024

Total time taken to generate the page: 0.01063 seconds