GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » PANDA » PANDA - Detector » PANDA TOF » New (additional) Geometry in Pandaroot
New (additional) Geometry in Pandaroot [message #18191] Mon, 04 May 2015 17:07
Dominik Steinschaden is currently offline  Dominik Steinschaden
Messages: 28
Registered: April 2015
continuous participant
From: *smi.oeaw.ac.at
Hallo everybody,

today i uploaded a new geometry file to the trunk version of pandaroot.

You can find the geometry file in trunk/geometry/SciTil_varB_201505.root
And the macro which was used to build the file under trunk/macro/scitil/geometry/create_scit_varB_rootgeo.C

Also the standard geometry is still available under trunk/geometry/SciTil_201504.root

This geometry should reflect a more realistic Version of the SciTil detector.

Main difference of this geometry are the scintillating tiles which are now 3 times the size of the original ones.
The precise dimensions can be looked up in the attached table of properties


To build a Super-Module the arrangement was changed.
On each scintillator tile 4 SiPMs are attached on both sides which are connected to one PCB card.
Two of such tiles build one line of a Super-Module.
60 Lines build a Super-Module. The single PCB cards are connected to readout PCB cards which transport the signal to the front end of the detector.

Attached are 3 pictures which show a single line, a Super-Module, and the whole barrel.
One can see the


  • scintillator tiles in blue
  • SiPMs in red
  • PCB (connectors) in yellow
  • PCB (Readout) in green


Regards

Dominik



  • Attachment: varB.zip
    (Size: 119.99KB, Downloaded 330 times)

[Updated on: Mon, 04 May 2015 17:18]

Report message to a moderator

 
Read Message
Previous Topic: Talk at the 13th Pisa Meeting on Advanced Detectors
Next Topic: TOF-Group Meeting at PANDA LIII. Collaboration Meeting (Uppsala)
Goto Forum:
  


Current Time: Fri Mar 29 14:29:03 CET 2024

Total time taken to generate the page: 0.01081 seconds