GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » LVUG » LVUG - Technische Fragen » LabVIEW und PDA
LabVIEW und PDA [message #197] Wed, 25 February 2004 10:05 Go to next message
Jürgen Buhrz is currently offline  Jürgen Buhrz
Messages: 5
Registered: February 2004
occasional visitor
Hallo Leute

Hat jemand von euch schon mit labVIEW und PDA gearbeitet
Ich habe einen iPAQ und ein paar Probleme damit.

Ich bin an einem direkten austausch inderessiert

Gruß

Jürgen
Re: LabVIEW und PDA [message #203 is a reply to message #197] Thu, 26 February 2004 09:05 Go to previous message
Brand is currently offline  Brand
Messages: 180
Registered: January 2004
Location: GSI - SB2 2.256
first-grade participant
Hallo Jürgen,
ich habe einen iPAQ H5550 mit PocketPC 2003 als Betriebssystem.

Im Prinzip funktioniert er mit LV zusammen ganz gut. Ich habe auch schon eine DAQCard-6062E erfolgreich benutzt.

Im Anfang hatte ich Probleme mit dem Download und dem Debuggen. Ein Patch zum Download auf ni.com und der Installation von eVC 4.0 hat dieses Problem erfolgreich beseitigt.

Es gibt allerdings immer noch einige Bugs:
1. Beim Vergleich von Strings ist das Logische Ergebnis nicht immer das erwartete. Du musst das Verhalten der Vergleichsfunktionen ausprobieren und dann entsprechen implementieren. Das wird im nächsten Patch sicher behoben.
2. Array und Cluster Controls und Indikatoren werden nicht angezeigt. Mach muß die Elemente zur Zeit indizieren bzw unbundlen und mit elementaren Controls und Indikatoren darstellen. Das wird im nächsten Patch sicher auch behoben.
3. Die Funktion "Scan into String" macht Probleme, wenn man die Error Cluster verdrahtet. Dieses Problem werde ich heute NI melden.
4. Die Event Case Struktur scheint mir Probleme zu machen. In einem meine Test VIs wird sie im Laufe der Zeit immer langsamer. Ich bin dabei das Problem einzukreisen. Ich werde es dann umgehen NI melden.

Ich bin aber trotzdem ganz begeistert von diesem Toolkit.

Gruß Holger

PS
Du kannst mich ja mal anrufen. Meine Telefonnummer findest Du im Web.

PPS
NATIONAL INSTRUMENTS TECHNICAL SUPPORT

Sehr geehrter Herr Brand,

Endlich habe ich eine vielversprechende Antwort aus USA.
Sie widerspricht etwas zwar dem, was ich ursprünglich gehört hatte, aber
es klingt nach einer Lösung.
Wie es aussieht, brauchen wir tatsächlich beide Versionen der embedded
Visual Tools (3+4).

Ich selbst bin noch nicht zum Testen gekommen, möchte Ihnen diese
Installations-Anleitung, aber nicht vorenthalten:



Thank you for your patience, and I have good news for you.

Yes the patch does allow debugging and direct downloads to the PocketPC
2003. After you have installed all the following files you will be able
to target the Pocket PC 2003, and it will auto download, allow debugging,
etc.

However like I said in the last e-mail you do need to have BOTH eVT 3 and
eVT 4 installed on the system.

To fully install eVT 4 you will need to install all these files and in the
order I present them. Some of the files are large and may take a while to
download.

1. eMbedded Visual C++ 4.0 needs to be installed first.
http://www.microsoft.com/downloads/details.aspx?familyid=1DA CDB3D-50D1-41B2-A107-FA75AE960856&displaylang=en

2. eMbedded Visual C++ 4.0 Service Pack 2
http://www.microsoft.com/downloads/details.aspx?familyid=CE7 F1AAA-54EB-4989-812B-7F955605DCB8&displaylang=en

3. eMbedded Visual C++ 4.0 SP2 QFE 5308, which I understand to be
basically patches on some of the compilers.
http://www.microsoft.com/downloads/details.aspx?FamilyId=121 E00BE-E0CF-4FA7-94B2-0CC6EFD47C79&displaylang=en

4. Software Development Kit for Windows Mobile 2003-based Pocket PCs
http://www.microsoft.com/downloads/details.aspx?FamilyId=999 6B314-0364-4623-9EDE-0B5FBB133652&displaylang=en

After all those installs you should now be able to target a Pocket PC 2003
device and 2003 emulator.




Ich hoffe, dass die Probleme damit endlich vom Tisch sind. Falls nicht,
lassen Sie es mich bitte wissen. Ich bin noch bis Ende dieser Woche in der
Arbeit, dann geht der Urlaub los (aber meine Kollegen sind ja auch noch
da, falls Sie nicht selbst Urlaub machen sollten).

Mit freundlichen Grüßen
i.A. Richard Heil
____________________________________________________________ _________________________________
Dipl.-Ing. Richard Heil | Application Engineer | National Instruments |
ni.com
Konrad-Celtis-Str. 79 | 81369 München | Tel.: +49 89 / 741 31 30 | Fax:
+49 89 / 714 60 35

9. Technologie- und Anwenderkongress VIP 2004
24.-25. März 2004 in München
Jetzt informieren und anmelden unter http://www.ni.com/germany/vip

Previous Topic: XY-Graph
Next Topic: Labview Schnittstelle zum CAN Antrieb
Goto Forum:
  


Current Time: Thu Mar 28 12:07:37 CET 2024

Total time taken to generate the page: 0.00924 seconds