GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » PANDA » PandaRoot » Bugs, Fixes, Releases » [FIXED] crash in run/sim_complete.C with Geant4
[FIXED] crash in run/sim_complete.C with Geant4 [message #15778] Tue, 14 January 2014 09:37 Go to next message
Maria Patsyuk is currently offline  Maria Patsyuk
Messages: 58
Registered: April 2010
continuous participant
From: *gsi.de
Dear all,

with the updated svn (23427) I'm getting the following crash in run/sim_complete.C, when using it with Geant4. I've looked on my previous topics about errors in these macros - now my errors look differently from the previous ones that's why I'm posting them (again). The simulation macro is attached. The error looks like the following:

root -l sim_completeG.C
root [0]
Processing sim_completeG.C...
FairRootManager::OpenOutFile("sim_complete_small.root")
[INFO ] Media file used : /u/mpatsyuk/PANDA/new_trunk/geometry/media_pnd.geo
Info in (PndGeoHandling::Instance): Making a new instance using the framework.
[INFO ] ============== FairRunSim: Initialising simulation run ==============
Info in <TGeoManager::TGeoManager>: Geometry FAIRGeom, FAIR geometry created
-I- FairGeoMedia Read media
-I container name PndEmcGeoPar
-I container name PndEmcDigiPar
-I container name PndEmcDigiNonuniformityPar

*************************************************************
initialisation for run id 1389687983
*************************************************************
-I- FairRunTimeDB::InitContainer() PndSensorNamePar
[ERROR ] init() PndSensorNamePar not initialized
-I- FairRunTimeDB::InitContainer() PndEmcGeoPar
[ERROR ] init() PndEmcGeoPar not initialized
-I- FairRunTimeDB::InitContainer() PndEmcDigiPar
PndEmcDigiPar initialized from Ascii file
-I- FairRunTimeDB::InitContainer() PndEmcDigiNonuniformityPar
[ERROR ] init() PndEmcDigiNonuniformityPar not initialized
Error in <FairRuntimeDb::initContainers()>: Error occured during initialization
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/TransMap.1500.root
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/DipoleMap1.1500.root
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/DipoleMap2.1500.root
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/SolenoidMap1.root
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/SolenoidMap2.root
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/SolenoidMap3.root
[INFO ] PndFieldMap: Reading field map from ROOT file /u/mpatsyuk/PANDA/new_trunk/input/SolenoidMap4.root
Loading Geant4 global libraries ...Our Macro
Loading Library libG4Tree
Loading Library libG4FR
Loading Library libG4GMocren
Loading Library libG4visHepRep
Loading Library libG4RayTracer
Loading Library libG4VRML
Loading Library libG4vis_management
Loading Library libG4modeling
Loading Library libG3toG4
Loading Library libG4interfaces
Loading Library libG4persistency
Loading Library libG4analysis
Loading Library libG4error_propagation
Loading Library libG4readout
Loading Library libG4physicslists
Loading Library libG4run
Loading Library libG4event
Loading Library libG4tracking
Loading Library libG4parmodels
Loading Library libG4processes
Loading Library libG4digits_hits
Loading Library libG4track
Loading Library libG4particles
Loading Library libG4geometry
Loading Library libG4materials
Loading Library libG4graphics_reps
Loading Library libG4intercoms
Loading Library libG4global
Loading Library libG4clhep
Loading VGM libraries ...
Loading g4root library ...
Loading libraries ... finished

*************************************************************
Geant4 version Name: geant4-09-06-patch-01 (1-February-2013)
Copyright : Geant4 Collaboration
Reference : NIM A 506 (2003), 250-303
WWW : http://cern.ch/geant4
*************************************************************

Adding HadronPhysicsList QGSP_BERT_EMV
G4PhysListFactory::GetReferencePhysList <QGSP_BERT_EMV> EMoption= 1
<<< Geant4 Physics List simulation engine: QGSP_BERT 4.0

<<< Reference Physics List QGSP_BERT_EMV is built

Adding ExtraPhysicsList optical
Adding SpecialPhysicsList stepLimiter+specialCuts+
Available UI session types: [ GAG, tcsh, csh ]
Visualization Manager instantiating with verbosity "warnings (3)"...
Geant4 has been created.
-I g4Config() using g4conf macro: /u/mpatsyuk/PANDA/new_trunk/gconfig/g4config.in
Seed for HepJamesRandom must be non-negative
Seed value supplied was -482490914
Using its absolute value instead
SetCuts Macro: Setting Processes..
SetCuts Macro: Setting cuts..
++++ TG4Warning: ++++
TG4G3CutVector::CheckCutValue:
PPCUTM cut value 1 MeV is lower than 2*e_mass.
The cut will be ignored.
+++++++++++++++++++++++

Info in <TGeoManager::SetTopVolume>: Top volume is cave. Master volume is cave
Info in <TGeoNavigator::BuildCache>: --- Maximum geometry depth set to 100
<I> PndPipe - Using geometry /u/mpatsyuk/PANDA/new_trunk/geometry/beampipe_201309.root
-I container name PndGeoSttPar
-I- STT total number of tubes: 4542

======= DRC:: ConstructGeometry() ========
=============================================
Focusing = 0
=============================================
Info in <TGeoManager::CheckGeometry>: Fixing runtime shapes...
Info in <TGeoManager::CheckGeometry>: ...Nothing to fix
Info in <TGeoManager::CloseGeometry>: Counting nodes...
Info in <TGeoManager::Voxelize>: Voxelizing...
Info in <TGeoManager::CloseGeometry>: Building cache...
Info in <TGeoManager::CountLevels>: max level = 12, max placements = 4550
Info in <TGeoManager::CloseGeometry>: 125103 nodes/ 4112 volume UID's in FAIR geometry
Info in <TGeoManager::CloseGeometry>: ----------------modeler ready----------------
Converting Root geometry to Geant4 via VGM ...

-------- EEEE ------- G4Exception-START -------- EEEE -------
*** G4Exception : GeomSolids0002
issued by : G4Polycone::G4Polycone()
Cannot create a Polycone with no contiguous segments.
Segments are not contiguous !
rMin[3] = 45 -- rMax[4] = 31
rMin[4] = 30 -- rMax[3] = 46
*** Fatal Error In Argument *** core dump ***
-------- EEEE -------- G4Exception-END --------- EEEE -------


*** G4Exception: Aborting execution ***


Could you please help me with it?

Best regards,
Maria

[Updated on: Thu, 16 January 2014 17:03] by Moderator

Report message to a moderator

Re: crash in run/sim_complete.C with Geant4 [message #15779 is a reply to message #15778] Tue, 14 January 2014 10:56 Go to previous messageGo to next message
Mohammad Al-Turany is currently offline  Mohammad Al-Turany
Messages: 518
Registered: April 2004
Location: GSI, Germany
first-grade participant
From: *gsi.de
Hi Maria,

I run your macro with Dec13 fairsoft and latest trunk in PANDA and all went smoothly! I try it on MAC OS and GSI linux and it woked with out any problem.

On the GSI cluster Dec13 is already installed, you just need to set your SIMPATH to

/cvmfs/fairroot.gsi.de/fairsoft/dec13

cheers,

Mohammad
Re: crash in run/sim_complete.C with Geant4 [message #15781 is a reply to message #15778] Tue, 14 January 2014 14:58 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *to.infn.it
Are you sure you did not change your g4Config.C?
Re: crash in run/sim_complete.C with Geant4 [message #15782 is a reply to message #15781] Tue, 14 January 2014 15:25 Go to previous messageGo to next message
Maria Patsyuk is currently offline  Maria Patsyuk
Messages: 58
Registered: April 2010
continuous participant
From: *gsi.de
You are right, Stefano,

for our detector we usually set

TrackSecondariesFirst false

and

TG4RunConfiguration* runConfiguration
= new TG4RunConfiguration("geomRootToGeant4", "QGSP_BERT_EMV+optical","stepLimiter+specialCuts+specialControls");

if I set trackSecondariesFirst = true and use option "geomRoot", than it runs...

Thank you!
Re: crash in run/sim_complete.C with Geant4 [message #15783 is a reply to message #15782] Tue, 14 January 2014 15:28 Go to previous message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *to.infn.it
I believe the geomRootToGeant4 option is the faulty one:

-------- EEEE ------- G4Exception-START -------- EEEE -------
 *** G4Exception : GeomSolids0002
 issued by : G4Polycone::G4Polycone()
 Cannot create a Polycone with no contiguous segments.
 Segments are not contiguous !
 rMin[3] = 45 -- rMax[4] = 31
 rMin[4] = 30 -- rMax[3] = 46
 *** Fatal Error In Argument *** core dump ***
 -------- EEEE -------- G4Exception-END --------- EEEE -------

Previous Topic: [FIXED] Error running macro/run/sim_complete.C with Geant3
Next Topic: [FIXED] crash in run/digi_complete.C
Goto Forum:
  


Current Time: Sun May 19 16:37:20 CEST 2024

Total time taken to generate the page: 0.00855 seconds