GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » PANDA » PandaRoot » Bugs, Fixes, Releases » Red Exclamation ! - Is it normal ?
Red Exclamation ! - Is it normal ? [message #15409] Tue, 03 September 2013 08:29 Go to next message
Ajay Kumar is currently offline  Ajay Kumar
Messages: 102
Registered: December 2011
Location: indore
continuous participant

From: 180.149.62*
Dear Panda Rooters,

I have taken simulation macro from the /macro/run folder. I have just simulated 10 lambda-lambdabar events to test the macro, whether it is working or not, since previously it was crashing.
after three or four run, its working and generated output as sim_complete.root
simparams.root
and does not generate any Fair_Info file as noticed earliar.
Now I run the output files on root shell ..then I am having a massage as-

ajay@ajay-Vostro-1014:~/pandaroot/PANDA_DATA/3GeV$ root -l sim_complete.root
root [0]
Attaching file sim_complete.root as _file0...
Error in <TClonesArray::SetClass>: called with a null pointer
root [1]

When I open the files in the root browser, these are opening normally but with red exclamation over the branch leaves.

Is this exclamation denotes the some errors in root files while histogram are there respective to leaves?
I have attached a png file of root browser here . Please have a look.


AJAY KUMAR
Research scholar
Indian Institute of Technology Indore,Indore
Madhya Pradesh
India
Re: Red Exclamation ! - Is it normal ? [message #15410 is a reply to message #15409] Tue, 03 September 2013 08:43 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: 2.235.190*
The exclamation marks denote functions in the tree and not data members. They are normal.

I don't understand your:

Error in <TClonesArray::SetClass>: called with a null pointer


Are you sure your sim macro finished succesfully?
Re: Red Exclamation ! - Is it normal ? [message #15411 is a reply to message #15410] Tue, 03 September 2013 08:56 Go to previous messageGo to next message
Ajay Kumar is currently offline  Ajay Kumar
Messages: 102
Registered: December 2011
Location: indore
continuous participant

From: 180.149.62*
Hello Stefeno,

Yes , It finished successfully but with one initial error. I have post here first and last part of terminal output. Please have a look on this.

ajay@ajay-Vostro-1014:~/pandaroot/PANDA_DATA/3GeV$ root -l sim_complete.C
root [0]
Processing sim_complete.C...
FairRootManager::OpenOutFile("sim_complete.root")
[INFO ] Media file used : /home/ajay/pandaroot/geometry/media_pnd.geo
Info in (PndGeoHandling::Instance): Making a new instance using the framework.
Error in <TClonesArray::SetClass>: called with a null pointer
-I container name PndEmcGeoPar
<I> PndEvtGenDirect
.......
.........
.........
[INFO ] *** PndGeoFtsPar written to ROOT file version: 1
[INFO ] *** PndRichGeoPar written to ROOT file version: 1
[INFO ] *** PndGeoSciTPar written to ROOT file version: 1
[INFO ] *** PndGeoFtofPar written to ROOT file version: 1
RealTime=84.063709 seconds, CpuTime=82.180000 seconds
Test passed
All ok
(int)1398127744

I am using this version of pandaroot-

URL: https://subversion.gsi.de/fairroot/pandaroot/trunk
Repository Root: https://subversion.gsi.de/fairroot
Repository UUID: 0381ead4-6506-0410-b988-94b70fbc4730
Revision: 21574
Node Kind: directory
Schedule: normal
Last Changed Author: dimam
Last Changed Rev: 21574
Last Changed Date: 2013-09-03 00:38:16 +0530 (Tue, 03 Sep 2013)

Thanks



AJAY KUMAR
Research scholar
Indian Institute of Technology Indore,Indore
Madhya Pradesh
India
Re: Red Exclamation ! - Is it normal ? [message #15412 is a reply to message #15411] Tue, 03 September 2013 10:12 Go to previous messageGo to next message
Ajay Kumar is currently offline  Ajay Kumar
Messages: 102
Registered: December 2011
Location: indore
continuous participant

From: 180.149.62*
Hello ..

I have also run old macro inside the folder /macro/mvd/TimeOrderedSim getting same problem.

ajay@ajay-Vostro-1014:~/pandaroot/macro/mvd/TimeOrderedSim$ root -l run_sim_sttcombi_dpm.C
root [0]
Processing run_sim_sttcombi_dpm.C...
Error in <TClonesArray::SetClass>: called with a null pointer
Ext: par addon: cut: 0 Truncated: Mvd_Sim
FairRootManager::OpenOutFile("Mvd_Sim.root")
[INFO ] Media file used : /home/ajay/pandaroot/geometry/media_pnd.geo
Info in (PndGeoHandling::Instance): Making a new instance using the framework.
-I container name PndEmcGeoPar
<I> PndDpmDirect initialization
<I> Momentum = 5
<I> Seed = 1.92235e+09
<I> Mode = 1
<I> Theta min = 2
Tmin= -3.04495133E-02 Tmax= -7.7836609
sig_col 3.95907741E-03
sig_inter 0.41664422 sig_iexact -2.43103430E-02
sig_had_el 20.359825
sig_had_p 13.508554
[INFO ] ============== FairRunSim: Initialising simulation run ==============
Info in <TGeoManager::TGeoManager>: Geometry FAIRGeom, FAIR geometry create
........
......
......
PndEmcHitProducer::FinishTask
*********************************************************
Read points # 115660
Produc hits# 465, threshold# 1e-06
Hits above threshhod#185
*********************************************************
RealTime=81.542956 seconds, CpuTime=81.160000 seconds
(int)54


jay@ajay-Vostro-1014:~/pandaroot/macro/mvd/TimeOrderedSim$ root -l Mvd_Sim.root
root [0]
Attaching file Mvd_Sim.root as _file0...
Error in <TClonesArray::SetClass>: called with a null pointer
root [1]



Help is needed

Thanks


AJAY KUMAR
Research scholar
Indian Institute of Technology Indore,Indore
Madhya Pradesh
India
Re: Red Exclamation ! - Is it normal ? [message #15415 is a reply to message #15412] Tue, 03 September 2013 13:19 Go to previous messageGo to next message
Radoslaw Karabowicz is currently offline  Radoslaw Karabowicz
Messages: 108
Registered: June 2004
Location: GSI
continuous participant
From: *gsi.de
The
Error in <TClonesArray::SetClass>: called with a null pointer
is removed when you comment out EMC.

I think Dima's recent commits broke something.

yours
radek
Re: Red Exclamation ! - Is it normal ? [message #15419 is a reply to message #15415] Tue, 03 September 2013 13:56 Go to previous messageGo to next message
Ajay Kumar is currently offline  Ajay Kumar
Messages: 102
Registered: December 2011
Location: indore
continuous participant

From: 180.149.62*
Hi Radek,

Yes, The error has gone after comment out EMC from the simulation macro.
But now my all old root file having this error.

Should I restore the previous pandaroot version again?


Thanks


AJAY KUMAR
Research scholar
Indian Institute of Technology Indore,Indore
Madhya Pradesh
India
Re: Red Exclamation ! - Is it normal ? [message #15420 is a reply to message #15419] Tue, 03 September 2013 14:07 Go to previous messageGo to next message
Radoslaw Karabowicz is currently offline  Radoslaw Karabowicz
Messages: 108
Registered: June 2004
Location: GSI
continuous participant
From: *gsi.de
I believe you can use version 21557 or previous ones.
Or wait a bit for necessary fixes to be implemented.

yours
radek
Re: Red Exclamation ! - Is it normal ? [message #15421 is a reply to message #15420] Wed, 04 September 2013 08:23 Go to previous messageGo to next message
Ajay Kumar is currently offline  Ajay Kumar
Messages: 102
Registered: December 2011
Location: indore
continuous participant

From: 180.149.62*
Hi all,

After going back to my previous pandaroot revision no. 20289, having exactly same problem.

Error in <TClonesArray::SetClass>: called with a null pointer

Again I updated my pandaroot directory to check the whethear problem is fixed or not now. still I am having that.

PANDAROOT version:-
URL: https://subversion.gsi.de/fairroot/pandaroot/trunk
Repository Root: https://subversion.gsi.de/fairroot
Repository UUID: 0381ead4-6506-0410-b988-94b70fbc4730
Revision: 21585
Node Kind: directory
Schedule: normal
Last Changed Author: karavdina
Last Changed Rev: 21585
Last Changed Date: 2013-09-03 23:24:21 +0530 (Tue, 03 Sep 2013)


Also I commented out the EMC from my sim macro but now this error coming with parameter file instead of simulation root file.

My old root file is responding same.

What should I do?

Thanks


AJAY KUMAR
Research scholar
Indian Institute of Technology Indore,Indore
Madhya Pradesh
India
Re: Red Exclamation ! - Is it normal ? [message #15423 is a reply to message #15421] Wed, 04 September 2013 10:25 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: 2.235.190*
The correct version for EMC is 21557, but in your stat:

Revision: 21585
...
Last Changed Rev: 21585


You are not using the correct revision.

Go to the emc folder and do:

svn update -r 21557


or do a "svn info" inside the EMC folder.
Re: Red Exclamation ! - Is it normal ? [message #15424 is a reply to message #15423] Wed, 04 September 2013 11:54 Go to previous messageGo to next message
Ajay Kumar is currently offline  Ajay Kumar
Messages: 102
Registered: December 2011
Location: indore
continuous participant

From: 180.149.62*
Thank you Stefano,

That was the problem exactly.

But I have a simple question, if we do the svn update inside pandaroot directory it should update most corrected version of all content inside the folder.

Is it like this ?

If yes.then why we have to go on previous version?

else
.......
......

Thanks


AJAY KUMAR
Research scholar
Indian Institute of Technology Indore,Indore
Madhya Pradesh
India
Re: Red Exclamation ! - Is it normal ? [message #15425 is a reply to message #15424] Wed, 04 September 2013 12:03 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: 2.235.190*
Ajay Kumar wrote on Wed, 04 September 2013 11:54

But I have a simple question, if we do the svn update inside pandaroot directory it should update most corrected version of all content inside the folder.

Is it like this ?

If yes.then why we have to go on previous version?



Radek Karabowicz wrote on Tue, 03 September 2013 14:07

I believe you can use version 21557 or previous ones.
Or wait a bit for necessary fixes to be implemented.




You decided to not wait for the fix, then you have to go to an older versiom.
Re: Red Exclamation ! - Is it normal ? [message #15558 is a reply to message #15410] Tue, 08 October 2013 12:57 Go to previous messageGo to next message
Shyam Kumar is currently offline  Shyam Kumar
Messages: 78
Registered: September 2012
Location: Mumbai, Maharashtra India
continuous participant
From: *ext.kfa-juelich.de
Hi stefano,
root -l sim_complete.root
Error in <TClonesArray::SetClass>: called with a null pointer
This error I also have got after updating Is it will affect the data? or just we can ignore it.

Re: Red Exclamation ! - Is it normal ? [message #15559 is a reply to message #15558] Tue, 08 October 2013 14:03 Go to previous message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *to.infn.it
For the moment ignore it, Jifeng should fit is sooner or later.
Previous Topic: [FIXED] Problems in PndTrkTracking2
Next Topic: [FIXED] Bug in DIRC correlation
Goto Forum:
  


Current Time: Tue Dec 03 10:17:59 CET 2024

Total time taken to generate the page: 0.00566 seconds