GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » PANDA » PandaRoot » MVD » Segmentation Fault - MVD digitization
Segmentation Fault - MVD digitization [message #13711] Thu, 05 July 2012 13:30 Go to next message
Ankhi Roy is currently offline  Ankhi Roy
Messages: 3
Registered: July 2012
occasional visitor
From: *ikp.kfa-juelich.de
Hi,

I have installed pandaroot from the recent trunk version -

https://subversion.gsi.de/fairroot/pandaroot/trunk

After generating some simulated data I was trying to digitize MVD, but it is giving segmentation fault -

Warning in <TEnvRec::ChangeValue>: duplicate entry <Library.TVirtualMagField=Base libFairTools.so libParBase.so libGeoBase.so libProof.so libGeomPainter.so libGeom.so libVMC.so libEG.so libMathCore.so libPhysics.so libMatrix.so libTree.so libHist.so libRIO.so libCint.so libCore.so> for level 0; ignored
FairRootManager::OpenOutFile("digi_mvd.root")
Info in <PndSdsHybridHitProducer::PndSdsHybridHitProducer>: MVD Hybrid Hit Producer created, Parameters will be taken from RTDB
[INFO ] The input consists out of the following trees and files:
[INFO ] - cbmsim
[INFO ] - sim_mvd.root
[INFO ] Parameter and input file are available, Assure that basic info is there for the run!
[INFO ] The number of entries in chain is 5000
[INFO ] Branch: EventHeader. not found in Tree
[INFO ] Branch: EventHeader. not found in Tree
[INFO ] No event Header was found!!!
[INFO ] Branch: EventHeader. not found in Tree
[INFO ] Branch: EventHeader. not found in Tree

*************************************************************
initialisation for run id 1208523731
*************************************************************
Info in <TGeoManager::CloseGeometry>: Geometry loaded from file...
Info in <TGeoManager::SetTopVolume>: Top volume is cave. Master volume is cave
Info in <TGeoNavigator::BuildCache>: --- Maximum geometry depth set to 100
Info in <TGeoManager::Voxelize>: Voxelizing...
Info in <TGeoManager::CountLevels>: max level = 9, max placements = 36
Info in <TGeoManager::CloseGeometry>: 6165 nodes/ 93 volume UID's in FAIR geometry
Info in <TGeoManager::CloseGeometry>: ----------------modeler ready----------------
Container FairBaseParSet initialized from ROOT file.
Info in (PndGeoHandling::Instance): Making a new instance using the framework.
Info in <PndMvdHybridHitProducer::SetParContainers>: done.
Info in <PndMvdStripHitProducer::SetParContainers()>: The container names list contains 10 entries
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDPixelDigiPar
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripDigiParRect
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripDigiParTrap
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripDigiParTD
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripDigiParTS
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDPixelTotDigiPar
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripTotDigiParRect
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripTotDigiParTrap
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripTotDigiParTD
Info in <PndMvdStripHitProducer::SetParContainers()>: MVDStripTotDigiParTS
Info in <PndMvdStripHitProducer::SetParContainers>: done.

*************************************************************
initialisation for run id 1208523731
*************************************************************
MVDPixelDigiPar initialized from Ascii file
MVDPixelTotDigiPar initialized from Ascii file
MVDStripDigiParRect initialized from Ascii file
MVDStripDigiParTrap initialized from Ascii file
MVDStripDigiParTD initialized from Ascii file
MVDStripDigiParTS initialized from Ascii file
MVDStripTotDigiParRect initialized from Ascii file
MVDStripTotDigiParTrap initialized from Ascii file
MVDStripTotDigiParTD initialized from Ascii file
MVDStripTotDigiParTS initialized from Ascii file
PndFieldCreator::SetParm() 0x4a1f9d0

*************************************************************
initialisation for run id 1208523731
*************************************************************
MVDPixelDigiPar initialized from Ascii file
MVDPixelTotDigiPar initialized from Ascii file
MVDStripDigiParRect initialized from Ascii file
MVDStripDigiParTrap initialized from Ascii file
MVDStripDigiParTD initialized from Ascii file
MVDStripDigiParTS initialized from Ascii file
MVDStripTotDigiParRect initialized from Ascii file
MVDStripTotDigiParTrap initialized from Ascii file
MVDStripTotDigiParTD initialized from Ascii file
MVDStripTotDigiParTS initialized from Ascii file
Container PndMultiFieldPar initialized from ROOT file.
OBJ: PndTransPar PndTransPar Trans. Field parameter container
OBJ: PndDipole1Par PndDipole1Par Dipole Field parameter container
OBJ: PndDipole2Par PndDipole2Par Dipole Field parameter container
OBJ: PndSolenoid1Par PndSolenoid1Par Solenoid 1st region parameter container
OBJ: PndSolenoid2Par PndSolenoid2Par Solenoid 2nd region parameter container
OBJ: PndSolenoid3Par PndSolenoid3Par Solenoid 3rd region parameter container
OBJ: PndSolenoid4Par PndSolenoid4Par Solenoid 4th region parameter container
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/TransMap.1500.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/DipoleMap1.1500.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/DipoleMap2.1500.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/SolenoidMap1.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/SolenoidMap2.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/SolenoidMap3.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/ankhi/pandaroot/input/SolenoidMap4.root
Info in <PndMvdHybridHitProducer::SetBranchNames>: Set Mvd Pixel names.
InBranchId: 1 for Branch: MVDPoint
OutBranchId: -1 for Branch: MVDPixelDigis
SDS Pixel Digitization Parameters:
fDimX (cm) = 0.01
fDimY (cm) = 0.01
Charge Threshold (e-) = 1000
Noise (ENC+Dispersion) (e-) = 200
Columns on FE = 110
Rows on FE = 116
Cluster search radius (channels) = 1.8
Charge cloud sigma (cm) = 0.000581
charge conv. (0:ideal, 1:TOT) = 1
Info in <PndMvdHybridHitProducer::Init()>: use TOT charge conversion
Tot parameter
charge time: 100 ns
const. current: 60 e/ns
threshold: 1000 e
clock frequency: 50 MHz
Info in <PndMvdHybridHitProducer::Init>: Intialisation successfull
InBranchId: 1 for Branch: MVDPoint
OutBranchId: -1 for Branch: MVDStripDigis
Info in <PndMvdStripHitProducer::SetCalculators()>: Create a Parameter Set for Rect sensors
Rect#
MVD Digitization Parameters:
Sensor type name is = Rect
Top Pitch = 0.013 cm
Bottom Pitch = 0.013 cm
Strip Angle (Top) = 1.5708rad = 90 deg
Skew Angle (Top->Bottom) = -1.5708rad = -90 deg
Top Anchor = (-3.3345,1.6705)
Bottom Anchor= (-3.3345,1.6705)
FE Channels = 128
Nr of Frontends (Top Side) = 4
Nr of Frontends (Bottom Side)= 2
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 1
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 12000
Info in <PndMvdStripHitProducer::SetCalculators()>: Create a Parameter Set for Trap sensors
Trap#
MVD Digitization Parameters:
Sensor type name is = Trap
Top Pitch = 0.00675 cm
Bottom Pitch = 0.00675 cm
Strip Angle (Top) = 1.4399rad = 82.5 deg
Skew Angle (Top->Bottom) = 0.261799rad = 15 deg
Top Anchor = (-1.72967,2.78327)
Bottom Anchor= (-1.72967,2.78327)
FE Channels = 128
Nr of Frontends (Top Side) = 4
Nr of Frontends (Bottom Side)= 4
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 1
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 12000
Info in <PndMvdStripHitProducer::SetCalculators()>: Create a Parameter Set for TD sensors
TD#
MVD Digitization Parameters:
Sensor type name is = TD
Top Pitch = 0.005 cm
Bottom Pitch = 0.005 cm
Strip Angle (Top) = 1.5708rad = 90 deg
Skew Angle (Top->Bottom) = -1.5708rad = -90 deg
Top Anchor = (-0.9575,0.9575)
Bottom Anchor= (-0.9575,0.9575)
FE Channels = 128
Nr of Frontends (Top Side) = 3
Nr of Frontends (Bottom Side)= 3
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 0
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 1200
Info in <PndMvdStripHitProducer::SetCalculators()>: Create a Parameter Set for TS sensors
TS#
MVD Digitization Parameters:
Sensor type name is = TS
Top Pitch = 0.005 cm
Bottom Pitch = 1.92 cm
Strip Angle (Top) = 1.5708rad = 90 deg
Skew Angle (Top->Bottom) = -1.5708rad = -90 deg
Top Anchor = (-0.9575,0.9575)
Bottom Anchor= (0,0.9575)
FE Channels = 128
Nr of Frontends (Top Side) = 3
Nr of Frontends (Bottom Side)= 1
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 0
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 1200
Info in <PndMvdStripHitProducer::SetCalculators()>: Use Tot charge conversion for Rect sensors
Tot parameter
charge time: 100 ns
const. current: 60 e/ns
threshold: 5000 e
clock frequency: 50 MHz
Info in <PndMvdStripHitProducer::SetCalculators()>: Use Tot charge conversion for Trap sensors
Tot parameter
charge time: 100 ns
const. current: 60 e/ns
threshold: 5000 e
clock frequency: 50 MHz
Info in <PndMvdStripHitProducer::SetCalculators()>: Use Ideal charge conversion for TD sensors
Info in <PndMvdStripHitProducer::SetCalculators()>: Use Ideal charge conversion for TS sensors
-I- PndSdsStripHitProducer: Initialisation successfull with these parameters:
MVD Digitization Parameters:
Sensor type name is = Rect
Top Pitch = 0.013 cm
Bottom Pitch = 0.013 cm
Strip Angle (Top) = 1.5708rad = 90 deg
Skew Angle (Top->Bottom) = -1.5708rad = -90 deg
Top Anchor = (-3.3345,1.6705)
Bottom Anchor= (-3.3345,1.6705)
FE Channels = 128
Nr of Frontends (Top Side) = 4
Nr of Frontends (Bottom Side)= 2
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 1
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 12000
MVD Digitization Parameters:
Sensor type name is = Trap
Top Pitch = 0.00675 cm
Bottom Pitch = 0.00675 cm
Strip Angle (Top) = 1.4399rad = 82.5 deg
Skew Angle (Top->Bottom) = 0.261799rad = 15 deg
Top Anchor = (-1.72967,2.78327)
Bottom Anchor= (-1.72967,2.78327)
FE Channels = 128
Nr of Frontends (Top Side) = 4
Nr of Frontends (Bottom Side)= 4
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 1
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 12000
MVD Digitization Parameters:
Sensor type name is = TD
Top Pitch = 0.005 cm
Bottom Pitch = 0.005 cm
Strip Angle (Top) = 1.5708rad = 90 deg
Skew Angle (Top->Bottom) = -1.5708rad = -90 deg
Top Anchor = (-0.9575,0.9575)
Bottom Anchor= (-0.9575,0.9575)
FE Channels = 128
Nr of Frontends (Top Side) = 3
Nr of Frontends (Bottom Side)= 3
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 0
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 1200
MVD Digitization Parameters:
Sensor type name is = TS
Top Pitch = 0.005 cm
Bottom Pitch = 1.92 cm
Strip Angle (Top) = 1.5708rad = 90 deg
Skew Angle (Top->Bottom) = -1.5708rad = -90 deg
Top Anchor = (-0.9575,0.9575)
Bottom Anchor= (0,0.9575)
FE Channels = 128
Nr of Frontends (Top Side) = 3
Nr of Frontends (Bottom Side)= 1
Charge Threshold (e-) = 5000
Noise (ENC+Dispersion) (e-) = 1000
Charge cloud sigma = 0.000581 cm
charge conv. (0:ideal, 1:TOT) = 0
Frontend type name is = APV25
Clusterfinder Mode = 0
Clusterfinder Mean Algorithm = 0
Clusterfinder Search Radius: Channels = 2
Clusterfinder Search Radius: Time = 0
Top/Bottom Charge correlation cut = 1200
[WARNING] Branch MVDStripDigis is already registered in WriteoutBufferMap
[WARNING] Branch MVDPixelDigis is already registered in WriteoutBufferMap

*** Break *** segmentation violation



===========================================================
There was a crash.
This is the entire stack trace of all threads:
===========================================================
#0 0x00007f8be6b0dc3e in waitpid () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007f8be6a93f5e in ?? () from /lib/x86_64-linux-gnu/libc.so.6




It will be nice if someone tells me what is wrong with this.

Thank you very much.

Ankhi


#2 0x00007f8be79c10f7 in TUnixSystem::StackTrace()
  • Attachment: digi_mvd.C
    (Size: 3.49KB, Downloaded 499 times)
Re: Segmentation Fault - MVD digitization [message #13715 is a reply to message #13711] Thu, 05 July 2012 19:29 Go to previous messageGo to next message
Ralf Kliemt is currently offline  Ralf Kliemt
Messages: 507
Registered: May 2007
Location: GSI, Darmstadt
first-grade participant

From: *pool.mediaWays.net
Hello Ankhi.

Could you please post the simulation macro, too? It would make it easier to trace that issue. What exact revision of the PandaRoot trunk did you use (svn info will tell you).

Kind regards.
Ralf Kliemt
Re: Segmentation Fault - MVD digitization [message #13716 is a reply to message #13715] Fri, 06 July 2012 09:58 Go to previous messageGo to next message
Ankhi Roy is currently offline  Ankhi Roy
Messages: 3
Registered: July 2012
occasional visitor
From: *ext.kfa-juelich.de
Dear Ralf,

Yesterday Tobias told me that I should use different macro for simulation and digitization. Then it works nicely.
Therefore it is not the problem of MVD digitization in pandaroot. I was using wrong macro.

Thanks a lot for your reply.

ankhi




Re: Segmentation Fault - MVD digitization [message #13717 is a reply to message #13716] Fri, 06 July 2012 10:18 Go to previous message
Ankhi Roy is currently offline  Ankhi Roy
Messages: 3
Registered: July 2012
occasional visitor
From: *ikp.kfa-juelich.de
Hi Ralf,

I have attached the simulation macro.
Revision of pandaroot - 15921

svn info -

Path: .
URL: https://subversion.gsi.de/fairroot/pandaroot/trunk
Repository Root: https://subversion.gsi.de/fairroot
Repository UUID: 0381ead4-6506-0410-b988-94b70fbc4730
Revision: 15921
Node Kind: directory
Schedule: normal
Last Changed Author: mpatsyuk
Last Changed Rev: 15898
Last Changed Date: 2012-07-03 16:32:38 +0530 (Tue, 03 Jul 2012)

ankhi
  • Attachment: sim_mvd.C
    (Size: 6.29KB, Downloaded 441 times)
Previous Topic: Timestamp devlopment
Next Topic: Material budget studies with MVD
Goto Forum:
  


Current Time: Wed Dec 04 03:38:27 CET 2024

Total time taken to generate the page: 0.00580 seconds