Home » PANDA » PandaRoot » Bugs, Fixes, Releases » genfit tracking with GEANE not working since geometry update
|
|
|
|
|
|
|
|
|
|
| Re: genfit tracking with GEANE not working since geometry update [message #9493 is a reply to message #9458] |
Thu, 01 October 2009 11:35   |
Felix Boehmer
Messages: 149
Registered: May 2007
Location: Munich
|
first-grade participant |
From: *e18.physik.tu-muenchen.de
|
|
Hello again,
I've tried the new method in my reco macro, but unfortunately it does not work.
I initialize Geane as a task:
// ----- Digitization run -------------------------------------------
FairRunAna *fRun= new FairRunAna();
fRun->SetInputFile(inFile);
fRun->AddFriend(mcFile);
fRun->SetOutputFile(outFile);
FairGeane *Geane = new FairGeane();
fRun->AddTask(Geane);
std::cout<<"\nGEANE initialized"<<std::endl;
but I get a seg-fault before the cout is reached:
------------------------FairGeane::Init ()------------------------------
Loading Geant3 libraries ...
Loading Geant3 libraries ... finished
MZSTOR. ZEBRA table base TAB(0) in /MZCC/ at adr 736816599 2BEAEDD7 HEX
MZSTOR. Initialize Store 0 in /GCBANK/
with Store/Table at absolute adrs 736925941 736816599
HEX 2BEC98F5 2BEAEDD7
HEX 1A72A 0
relative adrs 108330 0
with 1 Str. in 2 Links in 5300 Low words in 4999970 words.
This store has a fence of 16 words.
MZLOGL. Set Log Level 0 for store 0
1***** GEANT Version 3.21/11 Released on 100298
0***** Correction Cradle Version 0.1100
MZDIV. Initialize Division Constant in Store 0
NW/NWMAX= 20004000000, MODE/KIND= 1 2
Division 20 initialized.
MZLINK. Initialize Link Area /GCLINK/ for Store 0 NL/NS= 20 20
MZLINK. Initialize Link Area /GCSLNK/ for Store 0 NL/NS= 100 100
-I- G3Config: Geant3 with TGeo has been created for Geane.
Energy straggling area parameter from user set to: 0.999
SetCuts Macro: Setting Processes..
SetCuts Macro: Setting cuts..
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb6afc6c0 (LWP 13038)]
0xb647bcfa in TGeoManager::GetListOfVolumes (this=0x0) at include/TGeoManager.h:432
432 TObjArray *GetListOfVolumes() const {return fVolumes;}
(gdb) where
#0 0xb647bcfa in TGeoManager::GetListOfVolumes (this=0x0) at include/TGeoManager.h:432
#1 0xaf7ee7ca in TGeant3TGeo::FinishGeometry (this=0xa8cbd70) at TGeant3/TGeant3TGeo.cxx:2091
#2 0xaf7e7073 in TGeant3::Init (this=0xa8cbd70) at TGeant3/TGeant3.cxx:6214
#3 0xb3dd478e in FairMCApplication::InitMC (this=0xa85fd70, setup=0xa860088 "/home/felix/simulation/trunk/gconfig/Geane.C", cuts=0xb1c91ee0 "")
at /home/felix/simulation/trunk/base/FairMCApplication.cxx:212
#4 0xb1c78904 in FairGeane::Init (this=0xa85fca0) at /home/felix/simulation/trunk/geane/FairGeane.cxx:122
#5 0xb1c78c19 in FairGeane (this=0xa85fca0, UserConfig=
{_vptr.TString = 0xbfe7b2e8, static fgInitialCapac = 15, static fgResizeInc = 16, static fgFreeboard = 15, fData = 0xbfe7b2e0 "h\202��\030\202��h\202��\030\202��C", static fgIsA = 0xa6f4588}, UserCuts=
{_vptr.TString = 0xbfe7b2e0, static fgInitialCapac = 15, static fgResizeInc = 16, static fgFreeboard = 15, fData = 0x6d614e54 <Address 0x6d614e54 out of bounds>, static fgIsA = 0xa6f4588}) at /home/felix/simulation/trunk/geane/FairGeane.cxx:47
#6 0xb1c8decb in G__GeaneDict_172_0_2 (result7=0xbfe871c4, funcname=0xa780658 "\001", libp=0xbfe7cb58, hash=0) at /home/felix/simulation/build/geane/GeaneDict.cxx:415
#7 0xb7092c1b in Cint::G__ExceptionWrapper (funcp=0xb1c8d25b <G__GeaneDict_172_0_2>, result7=0xbfe871c4, funcname=0xa780658 "\001", libp=0xbfe7cb58, hash=0)
at cint/cint/src/Api.cxx:384
#8 0xb71781f2 in G__execute_call (result7=0xbfe871c4, libp=0xbfe7cb58, ifunc=0xa780658, ifn=0) at cint/cint/src/newlink.cxx:2329
#9 0xb71801fc in G__call_cppfunc (result7=0xbfe871c4, libp=0xbfe7cb58, ifunc=0xa780658, ifn=0) at cint/cint/src/newlink.cxx:2515
#10 0xb713a75a in G__interpret_func (result7=0xbfe871c4, funcname=0xbfe8829c "FairGeane", libp=0xbfe7cb58, hash=866, p_ifunc=0xa780658, funcmatch=1, memfunc_flag=3)
at cint/cint/src/ifunc.cxx:5278
#11 0xb71253b7 in G__getfunction (item=0xbfe932ec "FairGeane()", known3=0xbfe932c4, memfunc_flag=3) at cint/cint/src/func.cxx:2534
#12 0xb715ef8f in G__new_operator (expression=0xbfe96dc0 "FairGeane") at cint/cint/src/new.cxx:410
#13 0xb70f550d in G__getexpr (expression=0xbfe96dbc "new FairGeane") at cint/cint/src/expr.cxx:1191
#14 0xb70e4ed8 in G__define_var (tagnum=3918, typenum=-1) at cint/cint/src/decl.cxx:2583
#15 0xb7192377 in G__defined_type (type_name=0xbfe990cc "FairGeane", len=9) at cint/cint/src/parse.cxx:4446
#16 0xb7198750 in G__exec_statement (mparen=0xbfea05a8) at cint/cint/src/parse.cxx:6414
#17 0xb70dbc30 in G__exec_tempfile_core (file=0xbfea1e7c "/home/felix/simulation/trunk/./DATA/dEdx/pion_500MeV_unif_angle/runReco.C", fp=0x0)
at cint/cint/src/debug.cxx:251
#18 0xb70dc019 in G__exec_tempfile (file=0xbfea1e7c "/home/felix/simulation/trunk/./DATA/dEdx/pion_500MeV_unif_angle/runReco.C") at cint/cint/src/debug.cxx:798
#19 0xb71add11 in G__process_cmd (line=0x9f13178 ".X /home/felix/simulation/fairsoft/tools/root/etc/plugins/TVirtualStreamerInfo/P010_TStreamerInfo.C",
prompt=0x9ee542c "", more=0x9ee5424, err=0xbfea47e0, rslt=0xbfea47ac) at cint/cint/src/pause.cxx:3089
#20 0xb7a12fc2 in TCint::ProcessLine (this=0x9ee5408,
line=0x9f13178 ".X /home/felix/simulation/fairsoft/tools/root/etc/plugins/TVirtualStreamerInfo/P010_TStreamerInfo.C", error=0xbfea4f6c)
at core/meta/src/TCint.cxx:413
---Type <return> to continue, or q <return> to quit---
#21 0xb7a094ba in TCint::ProcessLineSynch (this=0x9ee5408,
line=0x9f13178 ".X /home/felix/simulation/fairsoft/tools/root/etc/plugins/TVirtualStreamerInfo/P010_TStreamerInfo.C", error=0xbfea4f6c)
at core/meta/src/TCint.cxx:480
#22 0xb7904f1d in TApplication::ExecuteFile (file=0xbfea4f79 "DATA/dEdx/pion_500MeV_unif_angle/runReco.C", error=0xbfea4f6c, keep=false)
at core/base/src/TApplication.cxx:956
#23 0xb790513c in TApplication::ProcessFile (this=0x9f108a8, file=0xbfea4f79 "DATA/dEdx/pion_500MeV_unif_angle/runReco.C", error=0xbfea4f6c, keep=false)
at core/base/src/TApplication.cxx:841
#24 0xb7907a30 in TApplication::ProcessLine (this=0x9f108a8, line=0xbfea4f76 ".x DATA/dEdx/pion_500MeV_unif_angle/runReco.C", sync=false, err=0xbfea4f6c)
at core/base/src/TApplication.cxx:814
#25 0xb6df3a16 in TRint::Run (this=0x9f108a8, retrn=false) at core/rint/src/TRint.cxx:368
#26 0x08048f47 in main (argc=1, argv=0xbfea70a4) at main/src/rmain.cxx:29
(gdb)
At first glance I would guess this has something to do with the cuts and config files? The error seems to occur in the line
fApp->InitMC(ConfigMacro.Data(), "");
of the Init() method of FairGeane.
For my simulation runs I use custom SetCuts.C and g3Config.C. I tried the FairGeane(TString, TString) constructor that takes custom config files as well, but this gives another error. The config files from the repository are of course present in trunk/gconfig.
Cheers,
Felix
|
|
|
|
| Re: genfit tracking with GEANE not working since geometry update [message #9494 is a reply to message #9458] |
Thu, 01 October 2009 11:41 |
Ralf Kliemt
Messages: 507
Registered: May 2007
Location: GSI, Darmstadt
|
first-grade participant |
From: *to.infn.it
|
|
Hello Felix.
| Quote: |
#0 0xb647bcfa in TGeoManager::GetListOfVolumes (this=0x0) at include/TGeoManager.h:432
|
The gGeoManager is not present.
The geometry moved. It is no longer in the simulation file, but rather in the root parameter file. You need to load it as well as you need to initialize the run. E.g:
FairRunAna *fRun= new FairRunAna();
fRun->SetInputFile(inSimuFile);
fRun->AddFriend(inDigiFile);
fRun->AddFriend(inRecoFile);
fRun->SetOutputFile(outFile.Data());
FairGeane *Geane = new FairGeane();
fRun->AddTask(Geane);
FairRuntimeDb* rtdb = fRun->GetRuntimeDb();
FairParRootFileIo* parIO = new FairParRootFileIo();
parIO->open(parFile.Data());
rtdb->setFirstInput(parIO);
rtdb->setOutput(parIO);
//...
fRun->Init();
PndEmcMapper *emcMap = PndEmcMapper::Instance(2,inSimuFile);
Geane->SetField(fRun->GetField());
fRun->Run(0,nEvents);
Cheers, Ralf.
[Updated on: Thu, 01 October 2009 11:44] Report message to a moderator |
|
|
|
|
|
| Re: genfit tracking with GEANE not working since geometry update [message #9517 is a reply to message #9458] |
Tue, 06 October 2009 14:04 |
Felix Boehmer
Messages: 149
Registered: May 2007
Location: Munich
|
first-grade participant |
From: *e18.physik.tu-muenchen.de
|
|
Hello guys,
just now I finally had time to try and get the reco working again. Unfortunately, I still don't get GEANE to run in the current trunk version (6675).
I have no consistent picture of how to use it, when to initialize the GEANE task (doing it like you posted here does not work for me) and how to treat the geometry (is LoadGeometry necessary or not?)
I working macro with GEANE tracking would help a lot. Unfortunately, in the macro/qa/lhetrack folder the run_sim macro crashes, so I can't test and validate the reco macro there:
.....
====== EMC:: ConstructRootGeometry() m3a ===
=============================================
File name = /home/felix/simulation/trunk/geometry/emc_module3new.root
You do not provide a ROOT file
======= DRC:: ConstructGeometry() ========
=============================================
DIRC min. radius = 50.35
DIRC max. radius = 53.0364
sob_shift = -150
sob_radius2 = 104.012
Info in <TGeoManager::CheckGeometry>: Fixing runtime shapes...
Info in <TGeoManager::CheckGeometry>: ...Nothing to fix
Info in <TGeoManager::CloseGeometry>: Counting nodes...
Info in <TGeoManager::Voxelize>: Voxelizing...
Info in <TGeoManager::CloseGeometry>: Building cache...
Info in <TGeoNavigator::BuildCache>: --- Maximum geometry depth set to 100
Info in <TGeoManager::CloseGeometry>: 464464 nodes/ 1436 volume UID's in FAIR geometry
Info in <TGeoManager::CloseGeometry>: ----------------modeler ready----------------
FairMCApplication::ConstructGeometry() : Now closing the geometry
Warning in <TGeoManager::CloseGeometry>: geometry already closed
-I- Initializing PndMvdDetector()
-I- PndDrc: Switching OFF Cherenkov Propagation
-I- PndDrc: Intialization successfull
-I- FairMCApplication -> simulation RunID: 868617750
Calculating cross section tables, see gphysi.dat for more information
Cross section calculation concluded successfully
-I- FairMCApplication:: Monte carlo Engine Initialisation with TGeant3TGeo
create PndFieldPar container PndMultiFieldPar
create PndFieldPar container PndTransPar
create PndFieldPar container PndDipole1Par
create PndFieldPar container PndDipole2Par
create PndFieldPar container PndSolenoid1Par
create PndFieldPar container PndSolenoid2Par
create PndFieldPar container PndSolenoid3Par
create PndFieldPar container PndSolenoid4Par
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb6bb46c0 (LWP 2847)]
0xb7fb0266 in vtable for TString () from /home/felix/simulation/fairsoft/tools/root/lib/libCore.so.5.24
(gdb) where
#0 0xb7fb0266 in vtable for TString () from /home/felix/simulation/fairsoft/tools/root/lib/libCore.so.5.24
#1 0xb3c74154 in ?? () from /home/felix/simulation/build/lib/libField.so
#2 0xb714ac1b in Cint::G__ExceptionWrapper (funcp=0xb3c615ca <G__FieldDict_190_0_5>, result7=0xbfd40de4, funcname=0xcd53b08 "\001", libp=0xbfd36778,
hash=0) at cint/cint/src/Api.cxx:384
#3 0xb72301f2 in G__execute_call (result7=0xbfd40de4, libp=0xbfd36778, ifunc=0xcd53b08, ifn=0) at cint/cint/src/newlink.cxx:2329
#4 0xb72381fc in G__call_cppfunc (result7=0xbfd40de4, libp=0xbfd36778, ifunc=0xcd53b08, ifn=0) at cint/cint/src/newlink.cxx:2515
#5 0xb71f275a in G__interpret_func (result7=0xbfd40de4, funcname=0xbfd41ebc "SetParameters", libp=0xbfd36778, hash=1344, p_ifunc=0xcd53b08,
funcmatch=1, memfunc_flag=1) at cint/cint/src/ifunc.cxx:5278
#6 0xb71dd3b7 in G__getfunction (item=0xbfd4840d "SetParameters(fField)", known3=0xbfd46758, memfunc_flag=1) at cint/cint/src/func.cxx:2534
#7 0xb72e6936 in G__getstructmem (store_var_type=112, varname=0xbfd45a5c "", membername=0xbfd4840d "SetParameters(fField)",
tagname=0xbfd4625c "Par", known2=0xbfd46758, varglobal=0xb73a3200, objptr=2) at cint/cint/src/var.cxx:6695
#8 0xb72d6fcc in G__getvariable (item=0xbfd48408 "Par->SetParameters(fField)", known=0xbfd46758, varglobal=0xb73a3200, varlocal=0xbfd4a768)
at cint/cint/src/var.cxx:5324
#9 0xb71abe64 in G__getitem (item=0xbfd48408 "Par->SetParameters(fField)") at cint/cint/src/expr.cxx:1884
#10 0xb71bfdb1 in G__getexpr (expression=0xbfd487ec "Par->SetParameters(fField)") at cint/cint/src/expr.cxx:1470
#11 0xb724ac6b in G__exec_function (statement=0xbfd487ec "Par->SetParameters(fField)", pc=0xbfd487e8, piout=0xbfd487e0, plargestep=0xbfd487d0,
presult=0xbfd486dc) at cint/cint/src/parse.cxx:601
#12 0xb7252f4e in G__exec_statement (mparen=0xbfd495a0) at cint/cint/src/parse.cxx:7015
#13 0xb725abe2 in G__exec_if () at cint/cint/src/parse.cxx:1353
#14 0xb72529b1 in G__exec_statement (mparen=0xbfd4a98c) at cint/cint/src/parse.cxx:6930
#15 0xb71f5844 in G__interpret_func (result7=0xbfd555c4, funcname=0xbfd5669c "run_sim_tpccombi_pgun", libp=0xbfd4af58, hash=2246, p_ifunc=0x9f41b08,
funcmatch=1, memfunc_flag=0) at cint/cint/src/ifunc.cxx:6113
#16 0xb71de14a in G__getfunction (item=0xbfd58c48 "run_sim_tpccombi_pgun(100,211,0.5,-1)", known3=0xbfd56f98, memfunc_flag=0)
---Type <return> to continue, or q <return> to quit---
at cint/cint/src/func.cxx:2745
#17 0xb71abfb0 in G__getitem (item=0xbfd58c48 "run_sim_tpccombi_pgun(100,211,0.5,-1)") at cint/cint/src/expr.cxx:1896
#18 0xb71bfdb1 in G__getexpr (expression=0x9f56a68 "run_sim_tpccombi_pgun(100,211,0.5,-1)") at cint/cint/src/expr.cxx:1470
#19 0xb71c0cf1 in G__calc_internal (exprwithspace=0xbfd59d2c "run_sim_tpccombi_pgun(100,211,0.5,-1)") at cint/cint/src/expr.cxx:1061
#20 0xb726261c in G__process_cmd (
line=0x98e11b8 ".X /home/felix/simulation/fairsoft/tools/root/etc/plugins/TVirtualStreamerInfo/P010_TStreamerInfo.C", prompt=0x98b342c "",
more=0x98b3424, err=0xbfd5c690, rslt=0xbfd5c65c) at cint/cint/src/pause.cxx:2240
#21 0xb7acafc2 in TCint::ProcessLine (this=0x98b3408,
line=0x98e11b8 ".X /home/felix/simulation/fairsoft/tools/root/etc/plugins/TVirtualStreamerInfo/P010_TStreamerInfo.C", error=0xbfd5ce1c)
at core/meta/src/TCint.cxx:413
#22 0xb7ac14ba in TCint::ProcessLineSynch (this=0x98b3408,
line=0x98e11b8 ".X /home/felix/simulation/fairsoft/tools/root/etc/plugins/TVirtualStreamerInfo/P010_TStreamerInfo.C", error=0xbfd5ce1c)
at core/meta/src/TCint.cxx:480
#23 0xb79bcf1d in TApplication::ExecuteFile (file=0xbfd5ce29 "macro/qa/lhetrack/run_sim_tpccombi_pgun.C(100,211,0.5,-1)", error=0xbfd5ce1c,
keep=false) at core/base/src/TApplication.cxx:956
#24 0xb79bd13c in TApplication::ProcessFile (this=0x98de8a8, file=0xbfd5ce29 "macro/qa/lhetrack/run_sim_tpccombi_pgun.C(100,211,0.5,-1)",
error=0xbfd5ce1c, keep=false) at core/base/src/TApplication.cxx:841
#25 0xb79bfa30 in TApplication::ProcessLine (this=0x98de8a8, line=0xbfd5ce26 ".x macro/qa/lhetrack/run_sim_tpccombi_pgun.C(100,211,0.5,-1)",
sync=false, err=0xbfd5ce1c) at core/base/src/TApplication.cxx:814
#26 0xb6eaba16 in TRint::Run (this=0x98de8a8, retrn=false) at core/rint/src/TRint.cxx:368
#27 0x08048f47 in main (argc=1, argv=0xbfd5ef54) at main/src/rmain.cxx:29
Cheers,
Felix
|
|
|
|
|
|
|
|
|
|
Goto Forum:
Current Time: Sat Apr 27 14:25:14 CEST 2024
Total time taken to generate the page: 0.00787 seconds
|
GSI Forum
Search
Help
Members
Login
Home
