GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » PANDA » PandaRoot » Bugs, Fixes, Releases » Crash in genfit/geane
Crash in genfit/geane [message #9247] Thu, 27 August 2009 14:21 Go to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *13-87-r.retail.telecomitalia.it
Hello,
I wanted to reconstruct some tracks using lhetrack+genfit, using TPC+MVD.
I have run the macros in macro/pid, exactly:

root run_sim_tpccombi_pgun.C"(500,13,1)"
root run_digi_tpccombi.C
root run_reco_tpccombi.C 


and after a while I get a crash coming from the kalman.
I have modified a bit the class PndLheKalmanTask.cxx in order to have some cout, and this is the error output:

Toggle Spoiler


The initial parameters are, in red: position, momentum, position error, momentum error -> a not so special track.
This track is made of 6 hits, it seems only MVD hits. At the end the error seems in TGeant3::Ertrak () .

If somebody could take a look and hopefully fix it...
Thanks in advance
Re: Crash in genfit/geane [message #9257 is a reply to message #9247] Fri, 28 August 2009 17:32 Go to previous messageGo to next message
Anonymous Poster From: *netcologne.de
Hi,

could you please run this in gdb?

gdb root.exe
run youscript.C
where
fr X

where the frame X is the one where the crash happens (xm55).

Thanks, Christian
Re: Crash in genfit/geane [message #9259 is a reply to message #9257] Fri, 28 August 2009 19:25 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *52-82-r.retail.telecomitalia.it
This is the output:

Program received signal SIGFPE, Arithmetic exception.
[Switching to Thread -1208949056 (LWP 25287)]
0xb513165b in xmm55_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
(gdb) where
#0 0xb513165b in xmm55_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#1 0xb51a8286 in trprfn_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#2 0xb51a34b5 in erprop_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#3 0xb51a5026 in ertrch_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#4 0xb51a5b81 in ertrgo_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#5 0xb51a4137 in ertrak_ () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#6 0xb52340c3 in TGeant3::Ertrak () from /home/stefano/july09/transport/geant3/lib/tgt_linux/libgeant321.so
#7 0x028615c2 in FairGeanePro::Propagate (this=0xcb1d860, PDG=13) at /home/stefano/july09/pandaroot/geane/FairGeanePro.cxx:276
#8 0x02860e47 in FairGeanePro::Propagate (this=0xcb1d860, TStart=0xbfeb4d30, TEnd=0xbfeb53e0, PDG=13)
at /home/stefano/july09/pandaroot/geane/FairGeanePro.cxx:227
#9 0x062b5d87 in GeaneTrackRep::extrapolate (this=0xf6c1670, pl=@0xbfeb62a0, statePred=@0xbfeb6420, covPred=@0xbfeb6320)
at /home/stefano/july09/pandaroot/trackrep/GeaneTrackRep.cxx:167
#10 0x0245953e in Kalman::processHit (this=0xbfeb78b0, tr=0xf7071a0, ihit=0, irep=0, rejectOutlier=false)
at /home/stefano/july09/pandaroot/genfit/Kalman.cxx:248
#11 0x024586b4 in Kalman::fittingPass (this=0xbfeb78b0, trk=0xf7071a0, direction=1) at /home/stefano/july09/pandaroot/genfit/Kalman.cxx:140
#12 0x02457e57 in Kalman::processTrack (this=0xbfeb78b0, trk=0xf7071a0) at /home/stefano/july09/pandaroot/genfit/Kalman.cxx:38
#13 0x037ee792 in PndLheKalmanTask::Exec (this=0xc15a8c8, opt=0x20f80a8 "") at /home/stefano/july09/pandaroot/lhetrack/PndLheKalmanTask.cxx:245
#14 0x008f8b25 in TTask::ExecuteTasks () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#15 0x008f8921 in TTask::ExecuteTask () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#16 0x0209a596 in FairRunAna::Run (this=0x94143f8, Ev_start=0, Ev_end=400) at /home/stefano/july09/pandaroot/base/FairRunAna.cxx:248
#17 0x020d1fbc in G__FairDict_592_0_5 (result7=0xbfec5b00, funcname=0x9411948 "\001", libp=0xbfeba4b0, hash=0)
at /home/stefano/july09/cbuild/base/FairDict.cxx:9025
#18 0x00e42d4b in Cint::G__ExceptionWrapper () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#19 0x00ed7be4 in G__execute_call () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#20 0x00ed7ef6 in G__call_cppfunc () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#21 0x00eb8bbf in G__interpret_func () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#22 0x00ea74f4 in G__getfunction () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#23 0x00f8b865 in G__getstructmem () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#24 0x00f8335b in G__getvariable () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#25 0x00e8b4e2 in G__getitem () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#26 0x00e8e477 in G__getexpr () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#27 0x00f075dc in G__exec_statement () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#28 0x00e79668 in G__exec_tempfile_core () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#29 0x00e7a99f in G__exec_tempfile () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#30 0x00f188ea in G__process_cmd () from /home/stefano/july09/tools/root/lib/libCint.so.5.24
#31 0x009594b3 in TCint::ProcessLine () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#32 0x00959634 in TCint::ProcessLineSynch () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#33 0x0088ecdb in TApplication::ExecuteFile () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#34 0x0088f06b in TApplication::ProcessFile () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#35 0x0088ced3 in TApplication::ProcessLine () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#36 0x002c16cf in TRint::HandleTermInput () from /home/stefano/july09/tools/root/lib/libRint.so.5.24
#37 0x002bfba0 in TTermInputHandler::Notify () from /home/stefano/july09/tools/root/lib/libRint.so.5.24
#38 0x002c1fee in TTermInputHandler::ReadNotify () from /home/stefano/july09/tools/root/lib/libRint.so.5.24
#39 0x00969e42 in TUnixSystem::CheckDescriptors () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#40 0x0096e028 in TUnixSystem::DispatchOneEvent () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#41 0x008e97c0 in TSystem::InnerLoop () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#42 0x008e9587 in TSystem::Run () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#43 0x0088d162 in TApplication::Run () from /home/stefano/july09/tools/root/lib/libCore.so.5.24
#44 0x002c0486 in TRint::Run () from /home/stefano/july09/tools/root/lib/libRint.so.5.24
---Type <return> to continue, or q <return> to quit---
#45 0x08048d5a in main ()
(gdb) fr xmm55
No symbol "xmm55" in current context.
(gdb) fr xmm55_
#0 0x00000000 in ?? ()
(gdb)
Re: Crash in genfit/geane [message #9260 is a reply to message #9259] Fri, 28 August 2009 20:02 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *52-82-r.retail.telecomitalia.it
Under suggestion of Lia, I have modified the geane parameters for the material "air", adding the following lines in gconfig/Geane.C:

TGeoMedium *o=gGeoManager->GetMedium("air");
o->SetParam(3, .4); 


to change the maximum angle of deflection inside the magnetic field.
In this case the analysis proceeds without errors. If I use larger values, such as 0.5 or greater, then I have the crash exactly at the same pointx.
I don't know if maybe it could be good to change this option for the common geane parameters, or if this is just a hard fix...

ADDED 29/08/09
I have tried with a different data set and I have followed in the same problem,. This time I had to go to 0.05 in orer to get rid of that crash. And, once I am applying such lower cuts, I have seen that there are more warnings such as:

FitterException thrown with excString:
cov_is_zero
in line: 257 in file: /home/stefano/july09/pandaroot/genfit/Kalman.cxx
with fatal flag 0
FitterException Info Output
===========================
===========================
FitterException thrown with excString:
GEANE propagation failed
in line: 272 in file: /home/stefano/july09/pandaroot/trackrep/GeaneTrackRep.cxx
with fatal flag 1
FitterException Info Output
===========================
===========================

Then maybe gendoit is skipping those tracks/reco hits.

[Updated on: Sat, 29 August 2009 14:19]

Report message to a moderator

Re: Crash in genfit/geane [message #9564 is a reply to message #9260] Fri, 16 October 2009 14:58 Go to previous messageGo to next message
Ronald Kunne is currently offline  Ronald Kunne
Messages: 32
Registered: October 2009
continuous participant
From: *in2p3.fr
Quote:

ADDED 29/08/09
I have tried with a different data set and I have followed in the same problem,. This time I had to go to 0.05 in orer to get rid of that crash.

Is there a work around for this problem? I have this every time, when running
root run_sim_tpccombi_pgun.C"(1000,13,2,-1)"
root run_digi_tpccombi.C
root run_reco_tpccombi.C
root run_kalman_tpc.C

The actual floating point exception error occurs in
#15 0xae69c5c5 in TGeant3::Ertrak (this=0xa120780, x1=0xd502208, p1=0xd502214,
x2=0xd50217c, p2=0xd502188, ipa=6, chopt=0xa14a7e8 "LE")
at TGeant3/TGeant3.cxx:5402

when it is called by FairGeanePro (the exact place differs).

Gosia Sudol on her 64 bit computer doesn't it have it at all.


Re: Crash in genfit/geane [message #9567 is a reply to message #9564] Fri, 16 October 2009 15:17 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *to.infn.it
You have to copy the file macro/pid/Geane.C into gconfig folder.
If you have again the crash, try to decrease a bit the param for air (do not touch PWO).

This is just a trick, waiting for the final fix of the original fortran code (there is somebody working on it). Once the fix will be released, you will have to use the "official" Geane.C, but for the moment try with this fix.
Re: Crash in genfit/geane [message #9572 is a reply to message #9567] Sat, 17 October 2009 12:45 Go to previous messageGo to next message
Anonymous Poster From: *dip.t-dialin.net
Hi,

I am trying to keep track of all FPE pitfalls. Can you please give me more exact information on the crash, i.e. the complete stack trace and also frame info of the steps in the stack trace that are inside the fortran code. You can get this if you compiled the external packages with debugging symbols (which it looks like you did) and then start the crashing macro like

gdb root.exe
run mymacro.C
[after the crash]
where
fr N
fr M

where N and M and ... are the frames inside fortran.

In case you knew all this, I want to apologize for telling you again Wink

Cheers, Christian
IFIELD setting. [message #9575 is a reply to message #9247] Mon, 19 October 2009 10:56 Go to previous messageGo to next message
Lia Lavezzi
Messages: 291
Registered: May 2007
Location: Torino
first-grade participant

From: *pv.infn.it
Hi,
while looking at the crash problem I was printing the magnetic field values read by geane (Hx, Hy, Hz) and I saw sometimes it sees 0, 0, 0 instead of the correct value (compared to the map values)... This is due to the fact that in some materials in the media_pnd.geo file the IFIELD parameter is set to 0 (for example for copper and mylar, two stt media): the STT is inside the magnetic field but geane does not see it in these cases.

Is there any reason why IFIELD must be set to 0 on some materials I didn' t think about?

I think that all the materials which are inside the magnetic field should switch this parameter on (i.e. set IFIELD to 1 and not to 0), otherwise during the geane tracking it will be assumed that here there is no field and the track will not bend inside these materials.

I would change at least copper and mylar (since I saw the problem there), is there any objection? I ask, since not only stt uses these materials.

Best regards,
Lia.

P.S.: Unfortunately this is not the source of the crash, so I keep investigating... please be patient! Rolling Eyes
Re: Crash in genfit/geane [message #9601 is a reply to message #9567] Fri, 23 October 2009 15:40 Go to previous messageGo to next message
Ronald Kunne is currently offline  Ronald Kunne
Messages: 32
Registered: October 2009
continuous participant
From: *in2p3.fr
Stefano Spataro wrote on Fri, 16 October 2009 15:17

You have to copy the file macro/pid/Geane.C into gconfig folder.

Yes, thanks very much. This cures it! Very Happy
Re: Crash in genfit/geane [message #9602 is a reply to message #9572] Fri, 23 October 2009 15:47 Go to previous messageGo to next message
Ronald Kunne is currently offline  Ronald Kunne
Messages: 32
Registered: October 2009
continuous participant
From: *in2p3.fr
Christian Hoeppner wrote on Sat, 17 October 2009 12:45

Can you please give me more exact information on the crash, i.e. the complete stack trace and also frame info of the steps in the stack trace that are inside the fortran code.

I didn't get your method to work, but here is all the info I do get. I hope this is enough to work with.

Macro with the crash: run_kalman_tpc.C
Simulated events: root run_sim_tpccombi_pgun.C"(1000,11,2,-1)"

Error output:

*** Break *** floating point exception
Attaching to program: /proc/9990/exe, process 9990
[Thread debugging using libthread_db enabled]
[New Thread 0xb6a6a6c0 (LWP 9990)]
0xb7f1c410 in __kernel_vsyscall ()
#1 0xb6b334d3 in waitpid () from /lib/tls/i686/cmov/libc.so.6
#2 0xb6ad6643 in ?? () from /lib/tls/i686/cmov/libc.so.6
#3 0xb6bfad7d in system () from /lib/tls/i686/cmov/libpthread.so.0
#4 0xb798cd99 in TUnixSystem::Exec (this=0x80ea6f8,
#5 0xb798c04e in TUnixSystem::StackTrace (this=0x80ea6f8)
at core/unix/src/TUnixSystem.cxx:2133
#6 0xb798f1dc in TUnixSystem::DispatchSignals (this=0x80ea6f8,
sig=kSigFloatingException) at core/unix/src/TUnixSystem.cxx:1100
#7 0xb798f309 in SigHandler (sig=kSigFloatingException)
at core/unix/src/TUnixSystem.cxx:350
#8 0xb7985481 in sighandler (sig=8) at core/unix/src/TUnixSystem.cxx:3369
#9 <signal handler called>
#10 0xb6c21442 in powf () from /lib/tls/i686/cmov/libm.so.6
#11 0xae23383a in erland_ (step=@0xae44e8ac, zmat=@0xae45a9fc,
amat=@0xae45a9f8, rho=@0xae45aa00, p=@0xae44e778, e=@0xae44e77c,
xmass=@0xae44f7b4, dedx=@0xae44e89c, dedx2=@0xae5d00d4)
at erdecks/erland.F:178
#12 0xae23709e in ertrch_ () at erdecks/ertrch.F:421
#13 0xae23816c in ertrgo_ () at erdecks/ertrgo.F:249
#14 0xae2355b9 in ertrak_ (x1=0xc8a5310, p1=0xc8a531c, x2=0xc8a5284,
p2=0xc8a5290, ipa=@0xbf8e42d4, chopt=@0xc86f178, _chopt=2)
at erdecks/ertrak.F:242
#15 0xae3225c5 in TGeant3::Ertrak (this=0x959f850, x1=0xc8a5310, p1=0xc8a531c,
x2=0xc8a5284, p2=0xc8a5290, ipa=3, chopt=0xc86f178 "PE")
at TGeant3/TGeant3.cxx:5402
#16 0xb1abbeca in FairGeanePro::Propagate (this=0xc8a5200, PDG=11)
at /vol0/panda/fairroot/pandaroot/trunk/geane/FairGeanePro.cxx:287
#17 0xb1abcabb in FairGeanePro::Propagate (this=0xc8a5200, TStart=0xbf8e49b0,
TEnd=0xbf8e4dd8, PDG=11)
at /vol0/panda/fairroot/pandaroot/trunk/geane/FairGeanePro.cxx:227
#18 0xb3616999 in GeaneTrackRep::extrapolate (this=0xdfaa7f0, pl=@0xbf8e6478,
statePred=@0xbf8e637c, covPred=@0xbf8e6280)
at /vol0/panda/fairroot/pandaroot/trunk/GenfitTools/trackrep/GeaneTrackRep/ GeaneTrackRep.cxx:168
#19 0xb36adb5e in GFKalman::processHit (this=0xbf8eb068, tr=0xe30c768,
ihit=14, irep=0, direction=1)
at /vol0/panda/fairroot/pandaroot/trunk/genfit/GFKalman.cxx:277
#20 0xb36ae824 in GFKalman::fittingPass (this=0xbf8eb068, trk=0xe30c768,
direction=1)
at /vol0/panda/fairroot/pandaroot/trunk/genfit/GFKalman.cxx:172
#21 0xb36aea05 in GFKalman::processTrack (this=0xbf8eb068, trk=0xe30c768)
at /vol0/panda/fairroot/pandaroot/trunk/genfit/GFKalman.cxx:72
#22 0xb1b2cbcb in PndLheKalmanTask::Exec (this=0xb52b5f8, opt=0xb3d92880 "")
at /vol0/panda/fairroot/pandaroot/trunk/lhetrack/PndLheKalmanTask.cxx:240
#23 0xb78f4123 in TTask::ExecuteTasks (this=0x87adb10, option=0xb3d92880 "")
at core/base/src/TTask.cxx:298
#24 0xb78f439f in TTask::ExecuteTask (this=0x87adb10, option=0xb3d92880 "")
at core/base/src/TTask.cxx:261
#25 0xb3d18cdf in FairRunAna::Run (this=0x87ada78, Ev_start=0, Ev_end=1000)
at /vol0/panda/fairroot/pandaroot/trunk/base/FairRunAna.cxx:253
#26 0xb3d564a4 in G__FairDict_662_0_5 (result7=0xbf8f7054,
funcname=0x87aae50 "\001", libp=0xbf8ec9e8, hash=0)
at /vol0/panda/fairroot/build/base/FairDict.cxx:9019
#27 0xb6ff5e6a in Cint::G__ExceptionWrapper (
funcp=0xb3d563ac <G__FairDict_662_0_5>, result7=0xbf8f7054,
funcname=0x87aae50 "\001", libp=0xbf8ec9e8, hash=0)
at cint/cint/src/Api.cxx:384
#28 0xb70d9c19 in G__execute_call (result7=0xbf8f7054, libp=0xbf8ec9e8,
ifunc=0x87aae50, ifn=0) at cint/cint/src/newlink.cxx:2329
#29 0xb70e1bb8 in G__call_cppfunc (result7=0xbf8f7054, libp=0xbf8ec9e8,
ifunc=0x87aae50, ifn=0) at cint/cint/src/newlink.cxx:2515
#30 0xb709c5e3 in G__interpret_func (result7=0xbf8f7054,
funcname=0xbf8f812c "Run", libp=0xbf8ec9e8, hash=309, p_ifunc=0x87aae50,
funcmatch=1, memfunc_flag=1) at cint/cint/src/ifunc.cxx:5278
#31 0xb708aba3 in G__getfunction (item=0xbf8fe65e "Run(0,nEvents)",
known3=0xbf8fc9a8, memfunc_flag=1) at cint/cint/src/func.cxx:2534
#32 0xb718ea45 in G__getstructmem (store_var_type=112,
varname=0xbf8fbcac "timer", membername=0xbf8fe65e "Run(0,nEvents)",
tagname=0xbf8fc4ac "fRun", known2=0xbf8fc9a8, varglobal=0xb72523a0,
objptr=2) at cint/cint/src/var.cxx:6695
#33 0xb717f3f2 in G__getvariable (item=0xbf8fe658 "fRun->Run(0,nEvents)",
known=0xbf8fc9a8, varglobal=0xb72523a0, varlocal=0x0)
at cint/cint/src/var.cxx:5324
#34 0xb7055d97 in G__getitem (item=0xbf8fe658 "fRun->Run(0,nEvents)")
at cint/cint/src/expr.cxx:1884
#35 0xb7069c09 in G__getexpr (expression=0xbf8fea3c "fRun->Run(0,nEvents)")
at cint/cint/src/expr.cxx:1470
#36 0xb70f4976 in G__exec_function (
statement=0xbf8fea3c "fRun->Run(0,nEvents)", pc=0xbf8fea34,
piout=0xbf8fea2c, plargestep=0xbf8fea1c, presult=0xbf8fe928)
at cint/cint/src/parse.cxx:601
#37 0xb70fced0 in G__exec_statement (mparen=0xbf905ee8)
at cint/cint/src/parse.cxx:7015
#38 0xb703ddf7 in G__exec_tempfile_core (
file=0xbf90774c " /vol0/panda/fairroot/pandaroot/trunk/tutorials/lhetrack/./run_kalman_tpc .C ", fp=0x0) at cint/cint/src/debug.cxx:251
#39 0xb703e1c9 in G__exec_tempfile (
file=0xbf90774c " /vol0/panda/fairroot/pandaroot/trunk/tutorials/lhetrack/./run_kalman_tpc .C ") at cint/cint/src/debug.cxx:798
#40 0xb710fa35 in G__process_cmd (
line=0x811b608 ".X /vol0/panda/soft/fairsoft/tools/root/etc/plugins/TFile/P100_TXNetFile.C", prompt=0x80ed09c "", more=0x80ed094, err=0xbf90a0a4,
rslt=0xbf90a070) at cint/cint/src/pause.cxx:3089
#41 0xb7977c31 in TCint::ProcessLine (this=0x80ed078,
line=0x811b608 ".X /vol0/panda/soft/fairsoft/tools/root/etc/plugins/TFile/P100_TXNetFile.C", error=0xbf90a810) at core/meta/src/TCint.cxx:413
#42 0xb796e895 in TCint::ProcessLineSynch (this=0x80ed078,
line=0x811b608 ".X /vol0/panda/soft/fairsoft/tools/root/etc/plugins/TFile/P100_TXNetFile.C", error=0xbf90a810) at core/meta/src/TCint.cxx:480
#43 0xb786ba2d in TApplication::ExecuteFile (
file=0xbf90a81d "run_kalman_tpc.C", error=0xbf90a810, keep=false)
at core/base/src/TApplication.cxx:956
#44 0xb786bbe0 in TApplication::ProcessFile (this=0x8118e78,
file=0xbf90a81d "run_kalman_tpc.C", error=0xbf90a810, keep=false)
at core/base/src/TApplication.cxx:841
#45 0xb786e307 in TApplication::ProcessLine (this=0x8118e78,
line=0xbf90a81a ".x run_kalman_tpc.C", sync=false, err=0xbf90a810)
at core/base/src/TApplication.cxx:814
#46 0xb6d50bdd in TRint::Run (this=0x8118e78, retrn=false)
at core/rint/src/TRint.cxx:368
#47 0x08048ef7 in main (argc=1, argv=0xbf90c944) at main/src/rmain.cxx:29
The program is running. Quit anyway (and detach it)? (y or n) [answered Y; input not from terminal]
Detaching from program: /proc/9990/exe, process 9990
Root >




Re: Crash in genfit/geane [message #9603 is a reply to message #9602] Fri, 23 October 2009 15:55 Go to previous messageGo to next message
Anonymous Poster From: 82.113.121*
Hi,

it could be that parameters in macros influence the crashing of GEANE. But still these problems should be fixed inside of GEANE. Although GEANE was widely used in the old days without any problems, it could just be that the compilers changed since then. All problems we have in this direction come (as far as anything I saw) are due to overflows in single precisions floats when you assign a double precision value to it (with an exponent >~ 30 or so). We will continue to have these problems unless we do something drastic, e.g. change GEANE to double precision all over. What do the GEANE experts think about this?

Cheers, Christian
Re: Crash in genfit/geane [message #9605 is a reply to message #9603] Fri, 23 October 2009 18:48 Go to previous message
Alberto Rotondi is currently offline  Alberto Rotondi
Messages: 9
Registered: June 2007
occasional visitor
From: *pv.infn.it

Hi,

I'm arriving more or less to the same conclusions, because the
behaviour of the crashes is typical of a bad compilation.
To put GEANE in double precision requires to put the
fortran statement IMPLICT DOUBLE PRECISON (A-H,O-Z) in all
the routines (Variables beginning with I,J,L,K,M,N are integers
in FORTRAN). This could be done in a test version and after
implemented in the CERNLIB.
We will try to do this

Alberto


Previous Topic: problems with new config.sh
Next Topic: Problems with integer FairTrackPar charge
Goto Forum:
  


Current Time: Sun Nov 03 23:46:33 CET 2024

Total time taken to generate the page: 0.00860 seconds