GSI Forum
GSI Helmholtzzentrum für Schwerionenforschung

Home » PANDA » PandaRoot » Tracking » riemann track finding
riemann track finding [message #5694] Wed, 23 January 2008 18:07 Go to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Here are some references to the riemann tracking.
he root file contains a 3D diagram of the hits on the riemann sphere. MVD and TPC included. Play around to see the planes!

For code look at the tpc/tpcreco/PndTpcRiemannTrackingTask and classes used by this.

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592

[Updated on: Wed, 23 January 2008 18:08]

Report message to a moderator

Re: riemann track finding [message #5696 is a reply to message #5694] Thu, 24 January 2008 17:15 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *KVI.nl
Hallo Sebastian,

hast Du etwas dagegen, wenn ich den Riemann-Trackfinder auf eine etwas allgemeinere Basis stelle und eine Kopie in PndTools erstelle? Oder hast Du Lust (und Zeit) das selbst zu machen? (Was mir natürlich viel lieber wäre.)

Es wäre auch sehr schön, wenn Du mir den Code schicken könntest, den Du geschrieben hast, um den MVD einzubauen.

Viele Grüße aus Groningen

Tobias

Re: riemann track finding [message #5697 is a reply to message #5696] Thu, 24 January 2008 17:23 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Hi Tobias!

Since this trackfinder is one major part of my thesis I want to be involved!
I would be happy to put it onto more general feet together with you! Let's do it together - what do you think?

I will put some safety switches into the code with the MVD and submit it. Then you can have a look and we can discuss the code.

There is much room for improvement still! Next thing I wanted to tackle was error treatment, which I omitted for the time being. But also the general structure is a bit cumbersome at some points. I would be happy to discuss this!!!

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5699 is a reply to message #5697] Thu, 24 January 2008 17:29 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *KVI.nl
Hi Sebastian,

you are right! In the forum I should write in English.

I would be happy to do it together with you.

I will have a look into your code and think a bit about the structure of it. We should discuss it maybe next week.

Cheers,

Tobias

Re: riemann track finding [message #5709 is a reply to message #5699] Mon, 28 January 2008 11:51 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Hi!

I have protected the RiemannTrackingTask against missing MVD hits. So we can start porting and generalizing.

We should start with the PndTpcRiemannHits and PndTpcRiemannTracks. Can you have a look and give me some feddback on these classes. Do you understand what's going on?

Tobias, can you copy them to the PndTools and start renaming?

There is a tpcrecp/test directory with a testing class. We should have something like this also for the general version!

cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5712 is a reply to message #5709] Mon, 28 January 2008 12:37 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
Hi Sebastian,

I can start porting the PndTpcRiemannHits and Tracks to PndTools. I think that I understand what is going on at least in these classes.

I just have a question concerning the projection. According to the paper you have posted, they suggest to project to a paraboloid but (I thin) in the Hit class you projection goes to a sphere. Shall we change this?

Cheers!

Tobias
Re: riemann track finding [message #5713 is a reply to message #5712] Mon, 28 January 2008 13:19 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Hi!

In their first publication the authors use the rieman sphere. They later switch to the paraboloid because then the trafo becomes simpler and also the error claculation is a bit simplified.

Maybe it is a good idea to follow this! And when we are modifiying things in that direction we should also include the errors. Maybe this is a good starting point. Lets go to the paraboloid form and add the errors.

Can we somehow subdivide the work?

Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5714 is a reply to message #5713] Mon, 28 January 2008 14:04 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
Hi Sebastian,

at the moment I am still studying, how the Riemann mechanism works in detail and how errors are handled.

Do you have any suggestions how to split the work?

Cheers,

Tobias
icon5.gif  Re: riemann track finding [message #5717 is a reply to message #5713] Mon, 28 January 2008 15:51 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
Hi Sebastian,

just for my understanding:

- You use two methods to determine if a hit belongs to a track:
  1. ProximityHTCorrelator
  2. RiemannHTCorrelator


The first uses only the distance between the last point in a track and the new point and is only used for less than 5 points in a track. The second checks if the new hit is close to the last hit in the track (as the first), and in addition checks the distance to the fitted plane and if the z-Position is reasonable.

After a new hit is added to a track the track is refitted.

The biggest problem I see at the moment for the MVD is the determination of the start plane, because the argument that hits belonging to a track are close together (like in the TPC) is not true for the MVD.
Either one tests all combination of three points to determine the plane and searches for at least one additional point or one has to use additional geometry information or use the planes determined by the TPC.

How would this look like for the STT?

Cheers,

Tobias
Re: riemann track finding [message #5718 is a reply to message #5712] Mon, 28 January 2008 16:36 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
Hi Sebastian,

I have moved PndTpcRiemannHit and ...Track to PndTools in a new folder riemannfit (not in svn yet). In addition I removed Tpc out of the names.

The class PndTpcRiemannHit contains a member _cluster of type PndTpcCluster, which has to be removed. I suggest to replace it by a CbmHit, which should be the base class for all data containing 3D hit information.

Cheers,

Tobias
Re: riemann track finding [message #5809 is a reply to message #5718] Tue, 05 February 2008 10:32 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Hi Tobias!

The _cluster member is for bookkeeping only. So an index would be ok too I guess.

I do not agree that we need a base class for space points!
If so then this should be build around TVector3. I am not happy about the CbmHit construction. Anyhow we should restrict the use of inheritance wherever possible and I do not see a reason why to use it here.

Concerning the problem of the starting plane I probably have a solution for this but I need some more time. As you said: You can always define a plane through 3 points! I will call this the TripletRiemannTrackFinder Wink Of course you will get ghost tracklets in the MVD!

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592

[Updated on: Tue, 05 February 2008 10:34]

Report message to a moderator

Re: riemann track finding [message #5810 is a reply to message #5809] Tue, 05 February 2008 11:04 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *physik.uni-giessen.de
Well,
CbmHit has, as private members:

Int_t fDetectorID; // Detector unique identifier
Double32_t fX, fY, fZ; // Position of hit [cm]
Double32_t fDx, fDy, fDz; // Errors of position [cm]
Int_t fRefIndex; // Index of CbmMCPoint for this hit

so a sort of TVector3 plus errors and two indexes.
I think it should be the best candidate as standard for 3d points. What do you have against it?
Re: riemann track finding [message #5813 is a reply to message #5810] Tue, 05 February 2008 12:08 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Hi!

1) I simply do not understand why we need a standard hit. Maybe you can explain.

2) If we talk about errors, this makes only sense if we have an error MATRIX. And we agreed that the object that is to be used for such kinds of applications is the RecoHit of genfit!

3) That CbmHit is A KIND OF TVector3 is exactly what I do not like. Would it use the TVector3 as a member directly one would have access to all the nice features of TVector3 for example in a Draw-Command. Anyway CbmHit can calculate a TVector3 with the Position method, so why not make a member variable of type TVector3 instead of three doubles??

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5814 is a reply to message #5813] Tue, 05 February 2008 12:25 Go to previous messageGo to next message
StefanoSpataro is currently offline  StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino
first-grade participant

From: *physik.uni-giessen.de
Quote:

1) I simply do not understand why we need a standard hit. Maybe you can explain.



If you have a base class for the points, you do not have to care about which kind of detector is giving you a point (and use its Get functions). You take an object of (CbmHit*) kind whatever detector is providing you this information.

Quote:

2) If we talk about errors, this makes only sense if we have an error MATRIX. And we agreed that the object that is to be used for such kinds of applications is the RecoHit of genfit!


I can agree, but one should provide a standard for all kinds of possible algorythms that should be implemented for pattern recognition. Maybe in the future one could need even the error (size of the cluster? size of the mvd strip? size of the straw tube?) for pattern recognition.

Quote:

3) That CbmHit is A KIND OF TVector3 is exactly what I do not like. Would it use the TVector3 as a member directly one would have access to all the nice features of TVector3 for example in a Draw-Command. Anyway CbmHit can calculate a TVector3 with the Position method, so why not make a member variable of type TVector3 instead of three doubles??


The TVector3 has nothing that links the points to the track (or detector hit) that has produced them. So when you want to evaluate efficiency/purity a simple TVector3 is maybe too much simple, and does not help you. The CbmHit has more space inside, and it contains even the TVector3, so you have already all its features by a simple Get function.

But this is just my opinion.

Re: riemann track finding [message #5815 is a reply to message #5814] Tue, 05 February 2008 12:34 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Quote:

If you have a base class for the points, you do not have to care about which kind of detector is giving you a point (and use its Get functions). You take an object of (CbmHit*) kind whatever detector is providing you this information.


Especially for the Pattern Recognition it matters which detector gave you the point. I would guess that for most detectors the pattern recognition will rely heavily on the specific features of that detector which might even include a special coordinate system. There are few detectors which really measure space points!

Quote:

I can agree, but one should provide a standard for all kinds of possible algorythms that should be implemented for pattern recognition. Maybe in the future one could need even the error (size of the cluster? size of the mvd strip? size of the straw tube?) for pattern recognition.


I perfectly agree! Error treatment is one of the things we want to add next. So a simple TVector3 is not sufficient. Concerning the connection with the McTruth this is more complicated as we havee already discussed on a few occasions.
In a full treatment you cannot make a bijective mapping of reconstructed hits to Monte Carlo hits.

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5816 is a reply to message #5815] Tue, 05 February 2008 12:37 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
But let's get back to the RiemannTracker.

I have some stomach-ache with the CbmHit - but maybe I am just suffering from NIHS.

But there is another issue - The RiemannHit is a very special one! It does not live in our 3D-Space but on the Riemann-Sphere. I am not sure that we should mix these two coordinate systems!

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5824 is a reply to message #5816] Wed, 06 February 2008 09:05 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
I am sorry that I did not take part in the discussion about CbmHit but I was busy in the last couple of days with celebrating Karneval Very Happy.

I see two different points for the PndRiemannHit:

  1. Do we need a constructor and a Set function taking a pointer to CbmHit as parameter?
  2. Do we need a data member CbmHit* inside PndRiemannHit which points back to the point the parameters for the RiemannHit were comming from?


For the first point I would clearly say yes. Here I have the same opinion as Stefano. CbmHit should be the base class for all data classes which give you 3D hit information. So a set function could be used by various subdetectors. I am not really happy with the implementation of CbmHit but this is a different topic.

For the second point I am not sure if it is really needed.

Maybe we can arrange an EVO meeting about Riemann-Tracking? I think it is easier to discuss these things directly instead of using a forum.

Alaaf (already over again Sad ),

Tobias
Re: riemann track finding [message #5825 is a reply to message #5824] Wed, 06 February 2008 10:01 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *adsl.alicedsl.de
Hi Tobias!

We need such a constructor I agree. Let's take the CbmHit as an interface.

I also agree with your second poin. We do not need the member pointer. This is just for book-keeping. Some kind of index-system should also work!

An EVO meeting would be a good idea. This week I am on vacation though. What about next wednesday?

Cheers! Sebastian.


Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5826 is a reply to message #5825] Wed, 06 February 2008 10:42 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
Wednesday in the morning (9:00 - 12:00) is fine with me, the rest of the day I have other meetings.

Monday or Tuesday would be fine with me, too.

Tobias
Re: riemann track finding [message #5863 is a reply to message #5826] Tue, 12 February 2008 14:30 Go to previous messageGo to next message
Sebastian Neubert is currently offline  Sebastian Neubert
Messages: 282
Registered: March 2006
Location: Munich
first-grade participant

From: *e18.physik.tu-muenchen.de
Ok, let's meet tomorrow 10.00h on EVO!

Sebastian Neubert
Technische Universität München
Department Physik E18
sneubert@e18.physik.tu-muenchen.de
tel: +49-8928912592
Re: riemann track finding [message #5864 is a reply to message #5863] Tue, 12 February 2008 14:36 Go to previous messageGo to next message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
Ok, I will book a room!
Re: riemann track finding [message #5865 is a reply to message #5824] Tue, 12 February 2008 14:44 Go to previous message
Tobias Stockmanns is currently offline  Tobias Stockmanns
Messages: 489
Registered: May 2007
first-grade participant
From: *ikp.kfa-juelich.de
I have booked the room "Riemann Tracking" from 9:30 - 11:30 for our round table. The password is "TPC" Smile

The official start of the meeting is 10:00 o'clock.

Until tomorrow

Tobias
Previous Topic: track finder
Next Topic: covariances in global coordinates
Goto Forum:
  


Current Time: Mon Dec 02 14:58:05 CET 2024

Total time taken to generate the page: 0.00742 seconds