|New (additional) Geometry in Pandaroot [message #18191]
||Mon, 04 May 2015 17:07
Registered: April 2015
today i uploaded a new geometry file to the trunk version of pandaroot.
You can find the geometry file in trunk/geometry/SciTil_varB_201505.root
And the macro which was used to build the file under trunk/macro/scitil/geometry/create_scit_varB_rootgeo.C
Also the standard geometry is still available under trunk/geometry/SciTil_201504.root
This geometry should reflect a more realistic Version of the SciTil detector.
Main difference of this geometry are the scintillating tiles which are now 3 times the size of the original ones.
The precise dimensions can be looked up in the attached table of properties
To build a Super-Module the arrangement was changed.
On each scintillator tile 4 SiPMs are attached on both sides which are connected to one PCB card.
Two of such tiles build one line of a Super-Module.
60 Lines build a Super-Module. The single PCB cards are connected to readout PCB cards which transport the signal to the front end of the detector.
Attached are 3 pictures which show a single line, a Super-Module, and the whole barrel.
One can see the
- scintillator tiles in blue
- SiPMs in red
- PCB (connectors) in yellow
- PCB (Readout) in green
(Size: 119.99KB, Downloaded 286 times)
[Updated on: Mon, 04 May 2015 17:18]
Report message to a moderator