GSI Forum: Bugs, Fixes, Releases » Not found tci for index

Home » PANDA » PandaRoot » Bugs, Fixes, Releases » Not found tci for index

Show: Today's Messages :: Polls :: Message Navigator

Not found tci for index [message #12727]

Wed, 19 October 2011 13:00

rajududhat
Messages: 17
Registered: May 2010
Location: Surat (India)

occasional visitor

From: *67.93.111.tataidc.co.in

Dear Friends

I got following error after updating the pandaroot (trunk) during run_sim_stt_evt.C

////////////////////////////////////////////

BBBB->33
cccc->12647
Info in <TGeoManager::CheckGeometry>: Fixing runtime shapes...
Info in <TGeoManager::CheckGeometry>: ...Nothing to fix
Info in <TGeoManager::CloseGeometry>: Counting nodes...
Info in <TGeoManager::Voxelize>: Voxelizing...
Info in <TGeoManager::CloseGeometry>: Building cache...
Info in <TGeoNavigator::BuildCache>: --- Maximum geometry depth set to 100
Info in <TGeoManager::CloseGeometry>: 1986492 nodes/ 3131 volume UID's in FAIR geometry
Info in <TGeoManager::CloseGeometry>: ----------------modeler ready----------------
====================================================
======= DRC:: ConstructOpticalGeometry() ========
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface MirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface MirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface EVSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface EVAirSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface EVSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface PDSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface EVPDSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface PDSurface. Not applicable in Geant3 - setting is ignored.
======= DRC::ConstructOpGeometry -> Finished! ======
PndTpcDetector::SetSpecialPhysicsCuts() Working on medium TPCmixture

************************************************************
PndTpcDetector::SetSpecialPhysicsCuts():
using special physics cuts ...
using LOSS=5 for ALICE MC model
************************************************************
-I- Initializing PndSdsDetector()

************************************************************
PndEmc::SetSpecialPhysicsCuts():
using special physics cuts ...
************************************************************
-I- Initializing PndGemDetector()
-I- PndDrc: Intialization started...
-I- PndDrc: Switching OFF Cherenkov Propagation
bar 1 id = 3023
-I- PndDrc: Intialization successfull
[INFO ] Initialize Tasks--------------------------
INITIALIZATION *********************
Not found tci for index = 229000010 in PndEmcStructure
linux-1djg:/home/pandaroot/fairroot/trunk/macro/run/03MY/test #
//////////////////////////////////////

Plz help me regarding this.

Rajeshkumar G. Dudhat
SVNIT (INDIA)

Report message to a moderator

Re: Not found tci for index [message #12728 is a reply to message #12727]

Wed, 19 October 2011 13:11

Dima Melnychuk
Messages: 213
Registered: April 2004
Location: National Centre for Nucle...

first-grade participant

From: *fuw.edu.pl

Hi,

Due to changes in EMC code, numeration of EMC geometry versions has been changed but it was not updated in all the macros.

So, please check that in your macro in:

 	  PndEmc *Emc = new PndEmc("EMC",kTRUE);
 	  Emc->SetGeometryVersion(2);
 	  Emc->SetStorageOfData(kFALSE);
 	  fRun->AddModule(Emc);

Emc->SetGeometryVersion(2); or Emc->SetGeometryVersion(1);
is used.

Dima

Report message to a moderator

Re: Not found tci for index [message #12729 is a reply to message #12728]

Wed, 19 October 2011 13:45

StefanoSpataro
Messages: 2736
Registered: June 2005
Location: Torino

first-grade participant

From: *to.infn.it

Hi,
if you are using run_sim_stt_evt.C, why the tpc geometry is appearing:

PndTpcDetector::SetSpecialPhysicsCuts() Working on medium TPCmixture

************************************************************
PndTpcDetector::SetSpecialPhysicsCuts():
using special physics cuts ...
using LOSS=5 for ALICE MC model
************************************************************

?
Maybe you have also messed up something else.

Report message to a moderator