Home » PANDA » PandaRoot » Bugs, Fixes, Releases » [OBSOLETE] run_sim_tpcorsttcombi.C (detector problems)
| [OBSOLETE] run_sim_tpcorsttcombi.C [message #16058] |
Tue, 25 March 2014 19:18  |
nakulphy
Messages: 13
Registered: March 2014
Location: India
|
occasional visitor |
From: 117.207.35*
|
|
hello all
I am trying to reproduce the data in master thesis Simulation of  )decays using the pandaroot framework by Martin Galuska but in the simulation file the detector tpc.geo is not found in /pandaroot/geometry in pandaroot with the revision 24201.
but when I removed the tpc detector there were the problem with the initialization and it gives
nakul@linux-kqx4:~/pandaroot/x3872/me> root -l run_sim_tpcorsttcombi.C
root [0]
Processing nakul.C...
TPCorSTT is set to tpc
Geant version is set to TGeant3
FairRootManager::OpenOutFile("points_tpccombi.root")
[INFO ] Media file used : /home/nakul/pandaroot/trunk/geometry/media_pnd.geo
Use detector with TPC setup.???
Info in (PndGeoHandling::Instance): Making a new instance using the framework.
-I container name PndEmcGeoPar
TypeOfSimulation is: Background
<I> PndDpmDirect initialization
<I> Momentum = 6.991
<I> Seed = 123456
<I> Mode = 0
<I> Theta min = 2
[INFO ] ============== FairRunSim: Initialising simulation run ==============
Info in <TGeoManager::TGeoManager>: Geometry FAIRGeom, FAIR geometry created
-I- FairGeoMedia Read media
-I container name PndEmcDigiPar
-I container name PndEmcDigiNonuniformityPar
*************************************************************
initialisation for run id 2103825461
*************************************************************
[ERROR ] init() PndEmcGeoPar not initialized
[ERROR ] init() PndSensorNamePar not initialized
PndEmcDigiPar initialized from Ascii file
[ERROR ] init() PndEmcDigiNonuniformityPar not initialized
Error in <FairRuntimeDb::initContainers()>: Error occured during initialization
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/TransMap.0890.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/DipoleMap1.0890.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/DipoleMap2.0890.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap1.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap2.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap3.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap4.root
[INFO ] -------------- Standard Config is called ------------------------------------
Loading Geant3 libraries ...
Loading Geant3 libraries ... finished
MZSTOR. ZEBRA table base TAB(0) in /MZCC/ at adr 997100607 3B6E8C3F HEX
MZSTOR. Initialize Store 0 in /GCBANK/
with Store/Table at absolute adrs 997209861 997100607
HEX 3B703705 3B6E8C3F
HEX 1AB2A 0
relative adrs 109354 0
with 1 Str. in 2 Links in 5300 Low words in 4999970 words.
This store has a fence of 16 words.
MZLOGL. Set Log Level 0 for store 0
1***** GEANT Version 3.21/11 Released on 100298
0***** Correction Cradle Version 0.1100
MZDIV. Initialize Division Constant in Store 0
NW/NWMAX= 20004000000, MODE/KIND= 1 2
Division 20 initialized.
MZLINK. Initialize Link Area /GCLINK/ for Store 0 NL/NS= 20 20
MZLINK. Initialize Link Area /GCSLNK/ for Store 0 NL/NS= 100 100
-I- G3Config: Geant3 with TGeo has been created.
SetCuts Macro: Setting Processes..
SetCuts Macro: Setting cuts..
Info in <TGeoManager::SetTopVolume>: Top volume is cave. Master volume is cave
Info in <TGeoNavigator::BuildCache>: --- Maximum geometry depth set to 100
<I> PndPipe - Using default geometry
fwendcap & bwendcap flags == 1 / 1
====== EMC 2):: ConstructASCIIGeometry() ===
=============================================
PndEmcReader: EMC geometry file == /home/nakul/pandaroot/trunk/geometry/emc_module12.dat
Emc module = 1
********
Emc module = 2
********
====== EMC:: ConstructRootGeometry() m3a ===
=============================================
File name = /home/nakul/pandaroot/trunk/geometry/emc_module3new.root
====== EMC:: ConstructRootGeometry() m4a ===
=============================================
fgeoName3:: /home/nakul/pandaroot/trunk/geometry/emc_module4_StraightGeo24.4.root
File name Bw1= /home/nakul/pandaroot/trunk/geometry/emc_module4_StraightGeo24.4.root
====== EMC:: ConstructRootGeometry() m5a ===
=============================================
fgeoName4:: /home/nakul/pandaroot/trunk/geometry/emc_module5_fsc.root
File name Fsc= /home/nakul/pandaroot/trunk/geometry/emc_module5_fsc.root
======= DRC:: ConstructGeometry() ========
=============================================
Focusing = 0
=============================================
-I container name PndGeoFtsPar
BBBB->36
cccc->13793
Info in <TGeoManager::CheckGeometry>: Fixing runtime shapes...
Info in <TGeoManager::CheckGeometry>: ...Nothing to fix
Info in <TGeoManager::CloseGeometry>: Counting nodes...
Info in <TGeoManager::Voxelize>: Voxelizing...
Info in <TGeoManager::CloseGeometry>: Building cache...
Info in <TGeoManager::CountLevels>: max level = 12, max placements = 4896
Info in <TGeoManager::CloseGeometry>: 1986573 nodes/ 3524 volume UID's in FAIR geometry
Info in <TGeoManager::CloseGeometry>: ----------------modeler ready----------------
====================================================
======= DRC:: ConstructOpticalGeometry() ========
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface MirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface MirrSurface. Not applicable in Geant3 - setting is ignored.
fbarnum = -999
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface EVSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface EVAirSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface EVSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface PDSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface EVPDSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface PDSurface. Not applicable in Geant3 - setting is ignored.
======= DRC::ConstructOpGeometry -> Finished! ======
-I- Initializing PndSdsDetector()
[INFO ] Branch: MVDPoint not registered!
-W- PndSdsDetector: New branch MVDPoint created!
************************************************************
PndEmc::SetSpecialPhysicsCuts():
using special physics cuts ...
************************************************************
-I- Initializing PndGemDetector()
-I- PndDrc: Intialization started...
-I- PndDrc: Switching OFF Cherenkov Propagation
DRC parameters: fpi = 3.14159, fzup = -120, fbarnum = 5, flside = 16.6323
bar 1 id = 3406
lens1ID = 3406, flens2ID = 3406, lens3ID = 3406
pd id = 3411
bbox id = 3409
EV id = 3410
-I- PndDrc: Intialization successfull
-I- Initializing PndFts()
[INFO ] Initialize Tasks--------------------------
INITIALIZATION *********************
Not found tci for index = 229000010 in PndEmcStructure
nakul@linux-kqx4:~/pandaroot/x3872/me>
and when I take the detector as in the apr13 tutorial it gives (I may be wrong in doing so....)
nakul@linux-kqx4:~/pandaroot/x3872/me> root -l run_sim_tpcorsttcombi.C
root [0]
Processing run_sim_tpcorsttcombi.C...
TPCorSTT is set to tpc
Geant version is set to TGeant3
FairRootManager::OpenOutFile("points_tpccombi.root")
[INFO ] Media file used : /home/nakul/pandaroot/trunk/geometry/media_pnd.geo
Info in (PndGeoHandling::Instance): Making a new instance using the framework.
-I container name PndEmcGeoPar
TypeOfSimulation is: Background
<I> PndDpmDirect initialization
<I> Momentum = 6.991
<I> Seed = 123456
<I> Mode = 0
<I> Theta min = 2
[INFO ] ============== FairRunSim: Initialising simulation run ==============
Info in <TGeoManager::TGeoManager>: Geometry FAIRGeom, FAIR geometry created
-I- FairGeoMedia Read media
-I container name PndEmcDigiPar
-I container name PndEmcDigiNonuniformityPar
*************************************************************
initialisation for run id 1914675557
*************************************************************
[ERROR ] init() PndEmcGeoPar not initialized
[ERROR ] init() PndSensorNamePar not initialized
PndEmcDigiPar initialized from Ascii file
[ERROR ] init() PndEmcDigiNonuniformityPar not initialized
Error in <FairRuntimeDb::initContainers()>: Error occured during initialization
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/TransMap.0890.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/DipoleMap1.0890.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/DipoleMap2.0890.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap1.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap2.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap3.root
[INFO ] PndFieldMap: Reading field map from ROOT file /home/nakul/pandaroot/trunk/input/SolenoidMap4.root
[INFO ] -------------- Standard Config is called ------------------------------------
Loading Geant3 libraries ...
Loading Geant3 libraries ... finished
MZSTOR. ZEBRA table base TAB(0) in /MZCC/ at adr 334277695 13ECAC3F HEX
MZSTOR. Initialize Store 0 in /GCBANK/
with Store/Table at absolute adrs 334386949 334277695
HEX 13EE5705 13ECAC3F
HEX 1AB2A 0
relative adrs 109354 0
with 1 Str. in 2 Links in 5300 Low words in 4999970 words.
This store has a fence of 16 words.
MZLOGL. Set Log Level 0 for store 0
1***** GEANT Version 3.21/11 Released on 100298
0***** Correction Cradle Version 0.1100
MZDIV. Initialize Division Constant in Store 0
NW/NWMAX= 20004000000, MODE/KIND= 1 2
Division 20 initialized.
MZLINK. Initialize Link Area /GCLINK/ for Store 0 NL/NS= 20 20
MZLINK. Initialize Link Area /GCSLNK/ for Store 0 NL/NS= 100 100
-I- G3Config: Geant3 with TGeo has been created.
SetCuts Macro: Setting Processes..
SetCuts Macro: Setting cuts..
Info in <TGeoManager::SetTopVolume>: Top volume is cave. Master volume is cave
Info in <TGeoNavigator::BuildCache>: --- Maximum geometry depth set to 100
<I> PndPipe - Using geometry /home/nakul/pandaroot/trunk/geometry/beampipe_201112.root
-I container name PndGeoSttPar
fwendcap & bwendcap flags == 1 / 1
====== EMC 2):: ConstructASCIIGeometry() ===
=============================================
PndEmcReader: EMC geometry file == /home/nakul/pandaroot/trunk/geometry/emc_module12.dat
Emc module = 1
********
Emc module = 2
********
====== EMC:: ConstructRootGeometry() m3a ===
=============================================
File name = /home/nakul/pandaroot/trunk/geometry/emc_module3_2012_new.root
====== EMC:: ConstructRootGeometry() m4a ===
=============================================
fgeoName3:: /home/nakul/pandaroot/trunk/geometry/emc_module4_StraightGeo24.4.root
File name Bw1= /home/nakul/pandaroot/trunk/geometry/emc_module4_StraightGeo24.4.root
====== EMC:: ConstructRootGeometry() m5a ===
=============================================
fgeoName4:: /home/nakul/pandaroot/trunk/geometry/emc_module5_fsc.root
File name Fsc= /home/nakul/pandaroot/trunk/geometry/emc_module5_fsc.root
======= DRC:: ConstructGeometry() ========
=============================================
Focusing = 0
=============================================
-I container name PndGeoFtsPar
BBBB->36
cccc->13793
Info in <TGeoManager::CheckGeometry>: Fixing runtime shapes...
Info in <TGeoManager::CheckGeometry>: ...Nothing to fix
Info in <TGeoManager::CloseGeometry>: Counting nodes...
Info in <TGeoManager::Voxelize>: Voxelizing...
Info in <TGeoManager::CloseGeometry>: Building cache...
Info in <TGeoManager::CountLevels>: max level = 12, max placements = 4896
Info in <TGeoManager::CloseGeometry>: 2000971 nodes/ 5722 volume UID's in FAIR geometry
Info in <TGeoManager::CloseGeometry>: ----------------modeler ready----------------
====================================================
======= DRC:: ConstructOpticalGeometry() ========
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface MirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface BarMirrSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface MirrSurface. Not applicable in Geant3 - setting is ignored.
fbarnum = -999
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface EVSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface EVAirSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface EVSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::DefineOpSurface>: Called for surface PDSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetBorderSurface>: Called for border surface EVPDSurface. Not applicable in Geant3 - setting is ignored.
Warning in <TGeant3TGeo::SetMaterialProperty>: Called for material surface PDSurface. Not applicable in Geant3 - setting is ignored.
======= DRC::ConstructOpGeometry -> Finished! ======
-I- Initializing PndSdsDetector()
[INFO ] Branch: MVDPoint not registered!
-W- PndSdsDetector: New branch MVDPoint created!
-I- Initializing PndGemDetector()
************************************************************
PndEmc::SetSpecialPhysicsCuts():
using special physics cuts ...
************************************************************
-I- PndDrc: Intialization started...
-I- PndDrc: Switching OFF Cherenkov Propagation
DRC parameters: fpi = 3.14159, fzup = -120, fbarnum = 5, flside = 16.6323
bar 1 id = 5156
lens1ID = 5156, flens2ID = 5156, lens3ID = 5156
pd id = 5161
bbox id = 5159
EV id = 5160
-I- PndDrc: Intialization successfull
-I- Initializing PndFts()
[INFO ] Initialize Tasks--------------------------
INITIALIZATION *********************
-I- PndEmcHitProducer: Intialization successfull
[INFO ] Simulation RunID: 1914675557
Calculating cross section tables, see gphysi.dat for more information
Cross section calculation concluded successfully
[INFO ] Monte carlo Engine Initialisation with : TGeant3TGeo
[INFO ] *** PndEmcGeoPar written to ROOT file version: 1
[INFO ] *** PndSensorNamePar written to ROOT file version: 1
[INFO ] *** PndEmcDigiPar written to ROOT file version: 1
[INFO ] *** PndEmcDigiNonuniformityPar written to ROOT file version: 1
[INFO ] *** FairBaseParSet written to ROOT file version: 1
[INFO ] *** PndMultiFieldPar written to ROOT file version: 1
[INFO ] *** PndGeoPassivePar written to ROOT file version: 1
[INFO ] *** PndGeoSttPar written to ROOT file version: 1
[INFO ] *** PndGeoFtsPar written to ROOT file version: 1
------------------------------------------------------------------------ --------
-------------- actual containers in runtime database -------------------------
PndEmcGeoPar Emc Geometry Parameters
PndSensorNamePar Match between GeoManager path and SensorId
PndEmcDigiPar Emc Digitalization Parameters
PndEmcDigiNonuniformityPar Emc Nonuniformity Parameters
FairBaseParSet class for parameter io
PndMultiFieldPar Multiple Field parameter container
PndTransPar Trans. Field parameter container
PndDipole1Par Dipole Field parameter container
PndDipole2Par Dipole Field parameter container
PndSolenoid1Par Solenoid 1st region parameter container
PndSolenoid2Par Solenoid 2nd region parameter container
PndSolenoid3Par Solenoid 3rd region parameter container
PndSolenoid4Par Solenoid 4th region parameter container
PndGeoPassivePar Passive Geometry Parameters
PndGeoSttPar Stt Geometry Parameters
PndGeoFtsPar Fts Geometry Parameters
-------------- runs, versions ------------------------------------------------
run id
container 1st-inp 2nd-inp output
run: 1914675557
PndEmcGeoPar 1914675557 -1 1
PndSensorNamePar 1914675557 -1 1
PndEmcDigiPar 1 -1 1
PndEmcDigiNonuniformityPar 1914675557 -1 1
FairBaseParSet 1914675557 -1 1
PndMultiFieldPar 1914675557 -1 1
PndTransPar 1914675557 -1 0
PndDipole1Par 1914675557 -1 0
PndDipole2Par 1914675557 -1 0
PndSolenoid1Par 1914675557 -1 0
PndSolenoid2Par 1914675557 -1 0
PndSolenoid3Par 1914675557 -1 0
PndSolenoid4Par 1914675557 -1 0
PndGeoPassivePar 1914675557 -1 1
PndGeoSttPar 1914675557 -1 1
PndGeoFtsPar 1914675557 -1 1
-------------- input/output --------------------------------------------------
first Input:
Ascii I/O /home/nakul/pandaroot/trunk/macro/params/all.par is open
detector I/Os: FairGenericParIo
second input: none
output:
OBJ: FairParRootFile params_tpccombi.root : 0 at: 0x2362ee0
Root file I/O params_tpccombi.root is open
detector I/Os: FairGenericParIo
**** GTRIGI: IEVENT= 1 IDEVT= 1 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 1) 4 primary tracks from vertex (0.041164, 0.057531, -0.625556 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 2 IDEVT= 2 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 2) 5 primary tracks from vertex (-0.146984, 0.036746, -0.314763 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 3 IDEVT= 3 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 3) 5 primary tracks from vertex (0.015610, 0.011733, 0.105003 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 4 IDEVT= 4 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 4) 6 primary tracks from vertex (0.040855, -0.029071, 0.099462 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 5 IDEVT= 5 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 5) 6 primary tracks from vertex (0.039660, -0.013778, -0.174028 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 6 IDEVT= 6 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 6) 7 primary tracks from vertex (-0.094980, -0.092367, 0.001769 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 7 IDEVT= 7 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 7) 9 primary tracks from vertex (0.091510, -0.232515, 0.088749 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 8 IDEVT= 8 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event  11 primary tracks from vertex (-0.018343, -0.021289, -0.308367 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 9 IDEVT= 9 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 9) 8 primary tracks from vertex (0.140869, -0.057685, -0.188831 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
**** GTRIGI: IEVENT= 10 IDEVT= 10 Random Seeds = 123456 0
[INFO ] FairPrimaryGenerator: (Event 10) 8 primary tracks from vertex (-0.094318, -0.048934, 0.087990 ) Event Time = 0.000000 (ns)
DIGI EXECUTION *********************
Macro finished succesfully.
RealTime=77.994650 seconds, CpuTime=77.200000 seconds
Output file is points_tpccombi.root
(int)1737213856
root [1]
but still here there is the problem with the output .root file and when I tried to open that file it gives me the error
nakul@linux-kqx4:~/pandaroot/x3872/me> root points_tpccombi.root
*******************************************
* *
* W E L C O M E to R O O T *
* *
* Version 5.34/05 14 February 2013 *
* *
* You are welcome to visit our Web site *
* http://root.cern.ch *
* *
*******************************************
ROOT 5.34/05 (tags/v5-34-05@48582, Oct 03 2013, 16:35:25 on linuxx8664gcc)
CINT/ROOT C/C++ Interpreter version 5.18.00, July 2, 2010
Type ? for help. Commands must be C++ statements.
Enclose multiple statements between { }.
root [0]
Attaching file points_tpccombi.root as _file0...
Error in <TClonesArray::SetClass>: called with a null pointer
root [1]
I am also attaching that file here.
Please help me out.
Thank you
Nakul Soni
[Updated on: Thu, 27 March 2014 11:37] by Moderator Report message to a moderator |
|
|
|
Current Time: Wed Nov 27 21:13:36 CET 2024
Total time taken to generate the page: 0.00881 seconds
|
GSI Forum
Search
Help
Members
Login
Home
