| PandaRoot volumes for forward spectrometer [message #12873] |
Wed, 21 December 2011 15:28  |
Olaf Hartmann
Messages: 105
Registered: December 2003
Location: Wien-Alsergrund
|
continuous participant |
From: *smi.oeaw.ac.at
|
|
Dear all,
I'm looking for the (most detailed available) geometry descriptions in PandaRoot for the forward detectors. What I can find in the geometry folder is:
dch.geo/dch.root
dipole.geo
fsc.geo
ftofwall.root
fts.geo
muon_FS.root
Can someone of the detector groups comment which geometries are up to date and how to initialize them from the macro?
In general I think it would be a good idea to maintain a WIKI page where the different geometries for the detectors are explained and which moreover is updated as soon as someone implements something new.
Cheers
Olaf.
|
|
|
|
|
|
| Re: PandaRoot volumes for forward spectrometer [message #12875 is a reply to message #12874] |
Thu, 22 December 2011 10:26  |
Dmitry Morozov
Messages: 34
Registered: May 2007
Location: Protvino, Russia
|
continuous participant |
From: *ihep.su
|
|
Hi Olaf,
Unfortunately, there is no usable macro for forward part inside repository.
I use the following geometry (part of the sim macro):
//------------------------- CAVE -----------------
FairModule *Cave= new PndCave("CAVE");
Cave->SetGeometryFileName("pndcave.geo");
fRun->AddModule(Cave);
//------------------------- Magnet -----------------
FairModule *Magnet= new PndMagnet("MAGNET");
//Magnet->SetGeometryFileName("FullSolenoid_V842.root");
Magnet->SetGeometryFileName("FullSuperconductingSolenoid_v831.root");
fRun->AddModule(Magnet);
FairModule *Dipole= new PndMagnet("MAGNET");
Dipole->SetGeometryFileName("dipole.geo");
fRun->AddModule(Dipole);
// ------------------------- Pipe -----------------
FairModule *Pipe= new PndPipe("PIPE");
Pipe->SetGeometryFileName("beampipe_201112.root");
fRun->AddModule(Pipe);
//------------------------- STT -----------------
FairDetector *Stt= new PndStt("STT", kTRUE);
Stt->SetGeometryFileName("straws_skewed_blocks_35cm_pipe.geo");
fRun->AddModule(Stt);
//------------------------- MVD -----------------
FairDetector *Mvd = new PndMvdDetector("MVD", kTRUE);
// Mvd->SetGeometryFileName("Mvd-2.1_FullVersion.root");
Mvd->SetGeometryFileName("Mvd-2.1_AddDisks_FullVersion.root");
fRun->AddModule(Mvd);
//------------------------- GEM -----------------
FairDetector *Gem = new PndGemDetector("GEM", kTRUE);
// Gem->SetGeometryFileName("gem_3Stations.root");
Gem->SetGeometryFileName("gem_4Stations.root");
fRun->AddModule(Gem);
//------------------------- EMC -----------------
PndEmc *Emc = new PndEmc("EMC",kTRUE);
Emc->SetGeometryVersion(1);
Emc->SetStorageOfData(kFALSE);
fRun->AddModule(Emc);
//------------------------- DRC -----------------
PndDrc *Drc = new PndDrc("DIRC", kTRUE);
Drc->SetGeometryFileName("dirc_l0_p0.root");
Drc->SetRunCherenkov(kFALSE);
fRun->AddModule(Drc);
//------------------------- DISC -----------------
PndDsk* Dsk = new PndDsk("DSK", kTRUE);
Dsk->SetGeometryFileName("dsk.root");
Dsk->SetStoreCerenkovs(kFALSE);
Dsk->SetStoreTrackPoints(kFALSE);
fRun->AddModule(Dsk);
//------------------------- MDT -----------------
PndMdt *Muo = new PndMdt("MDT",kTRUE);
Muo->SetBarrel("fast");
Muo->SetEndcap("fast");
Muo->SetMuonFilter("fast");
Muo->SetMdtMagnet(kTRUE);
Muo->SetMdtMFIron(kTRUE);
fRun->AddModule(Muo);
//------------------------- FTS -----------------
FairDetector *Fts= new PndFts("FTS", kTRUE);
Fts->SetGeometryFileName("fts.geo");
fRun->AddModule(Fts);
//--------------------------- FTOF -----------------
FairDetector *FTof = new PndFtof("FTOF",kTRUE);
FTof->SetGeometryFileName("ftofwall.root");
fRun->AddModule(FTof);
===========================================================
To have forward MDT use Sefano's suggestion.
Note, that default ftofwall.root from the svn might be overlapped with FSC. So I use my own ftofwall.root with shifted FTOF along z. You can create it using macro "macro/ftof/create_ftof_rootgeo.C"
Hope this helps.
Dmitry
|
|
|
|
GSI Forum
Search
Help
Members
Login
Home
